refactor: 精简R8裸机工程并补强调试链路
This commit is contained in:
+17
-12
File diff suppressed because one or more lines are too long
@@ -43,6 +43,13 @@ static err_t tcp_client_on_recv(void *arg, struct tcp_pcb *pcb, struct pbuf *p,
|
||||
}
|
||||
|
||||
if (p == NULL) {
|
||||
tcp_arg(pcb, NULL);
|
||||
tcp_recv(pcb, NULL);
|
||||
tcp_sent(pcb, NULL);
|
||||
tcp_err(pcb, NULL);
|
||||
if (tcp_close(pcb) != ERR_OK) {
|
||||
tcp_abort(pcb);
|
||||
}
|
||||
ctx->pcb = NULL;
|
||||
ctx->status.state = TCP_CLIENT_STATE_DISCONNECTED;
|
||||
ctx->next_retry_ms = HAL_GetTick() + ctx->config.reconnect_interval_ms;
|
||||
|
||||
@@ -40,6 +40,13 @@ static err_t tcp_server_on_recv(void *arg, struct tcp_pcb *pcb, struct pbuf *p,
|
||||
}
|
||||
|
||||
if (p == NULL) {
|
||||
tcp_arg(pcb, NULL);
|
||||
tcp_recv(pcb, NULL);
|
||||
tcp_sent(pcb, NULL);
|
||||
tcp_err(pcb, NULL);
|
||||
if (tcp_close(pcb) != ERR_OK) {
|
||||
tcp_abort(pcb);
|
||||
}
|
||||
ctx->client_pcb = NULL;
|
||||
ctx->status.state = TCP_SERVER_STATE_LISTENING;
|
||||
return ERR_OK;
|
||||
|
||||
+14
-4
@@ -52,6 +52,8 @@ static int apply_uart_config(uart_channel_t channel)
|
||||
{
|
||||
uart_channel_ctx_t *ctx = &g_channels[channel];
|
||||
UART_HandleTypeDef *huart = ctx->huart;
|
||||
uint32_t word_length;
|
||||
uint32_t parity;
|
||||
|
||||
if (huart == NULL) {
|
||||
return -1;
|
||||
@@ -63,21 +65,29 @@ static int apply_uart_config(uart_channel_t channel)
|
||||
}
|
||||
|
||||
huart->Init.BaudRate = ctx->config.baudrate;
|
||||
huart->Init.WordLength = (ctx->config.data_bits == 9u) ? UART_WORDLENGTH_9B : UART_WORDLENGTH_8B;
|
||||
huart->Init.StopBits = (ctx->config.stop_bits == 2u) ? UART_STOPBITS_2 : UART_STOPBITS_1;
|
||||
|
||||
switch (ctx->config.parity) {
|
||||
case 1:
|
||||
huart->Init.Parity = UART_PARITY_ODD;
|
||||
parity = UART_PARITY_ODD;
|
||||
break;
|
||||
case 2:
|
||||
huart->Init.Parity = UART_PARITY_EVEN;
|
||||
parity = UART_PARITY_EVEN;
|
||||
break;
|
||||
default:
|
||||
huart->Init.Parity = UART_PARITY_NONE;
|
||||
parity = UART_PARITY_NONE;
|
||||
break;
|
||||
}
|
||||
|
||||
if (parity == UART_PARITY_NONE) {
|
||||
word_length = (ctx->config.data_bits == 9u) ? UART_WORDLENGTH_9B : UART_WORDLENGTH_8B;
|
||||
} else {
|
||||
word_length = (ctx->config.data_bits >= 8u) ? UART_WORDLENGTH_9B : UART_WORDLENGTH_8B;
|
||||
}
|
||||
|
||||
huart->Init.WordLength = word_length;
|
||||
huart->Init.Parity = parity;
|
||||
|
||||
return (HAL_UART_Init(huart) == HAL_OK) ? 0 : -1;
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,68 @@
|
||||
cmake_minimum_required(VERSION 3.22)
|
||||
|
||||
#
|
||||
# This file is generated only once,
|
||||
# and is not re-generated if converter is called multiple times.
|
||||
#
|
||||
# User is free to modify the file as much as necessary
|
||||
#
|
||||
|
||||
# Setup compiler settings
|
||||
set(CMAKE_C_STANDARD 11)
|
||||
set(CMAKE_C_STANDARD_REQUIRED ON)
|
||||
set(CMAKE_C_EXTENSIONS ON)
|
||||
|
||||
|
||||
# Define the build type
|
||||
if(NOT CMAKE_BUILD_TYPE)
|
||||
set(CMAKE_BUILD_TYPE "Debug")
|
||||
endif()
|
||||
|
||||
# Set the project name
|
||||
set(CMAKE_PROJECT_NAME TCP2UART)
|
||||
|
||||
# Enable compile command to ease indexing with e.g. clangd
|
||||
set(CMAKE_EXPORT_COMPILE_COMMANDS TRUE)
|
||||
|
||||
# Core project settings
|
||||
project(${CMAKE_PROJECT_NAME})
|
||||
message("Build type: " ${CMAKE_BUILD_TYPE})
|
||||
|
||||
# Enable CMake support for ASM and C languages
|
||||
enable_language(C ASM)
|
||||
|
||||
# Create an executable object type
|
||||
add_executable(${CMAKE_PROJECT_NAME})
|
||||
|
||||
# Add STM32CubeMX generated sources
|
||||
add_subdirectory(cmake/stm32cubemx)
|
||||
|
||||
# Link directories setup
|
||||
target_link_directories(${CMAKE_PROJECT_NAME} PRIVATE
|
||||
# Add user defined library search paths
|
||||
)
|
||||
|
||||
# Add sources to executable
|
||||
target_sources(${CMAKE_PROJECT_NAME} PRIVATE
|
||||
# Add user sources here
|
||||
)
|
||||
|
||||
# Add include paths
|
||||
target_include_directories(${CMAKE_PROJECT_NAME} PRIVATE
|
||||
# Add user defined include paths
|
||||
)
|
||||
|
||||
# Add project symbols (macros)
|
||||
target_compile_definitions(${CMAKE_PROJECT_NAME} PRIVATE
|
||||
# Add user defined symbols
|
||||
)
|
||||
|
||||
# Remove wrong libob.a library dependency when using cpp files
|
||||
list(REMOVE_ITEM CMAKE_C_IMPLICIT_LINK_LIBRARIES ob)
|
||||
|
||||
# Add linked libraries
|
||||
target_link_libraries(${CMAKE_PROJECT_NAME}
|
||||
stm32cubemx
|
||||
|
||||
# Add user defined libraries
|
||||
)
|
||||
@@ -0,0 +1,38 @@
|
||||
{
|
||||
"version": 3,
|
||||
"configurePresets": [
|
||||
{
|
||||
"name": "default",
|
||||
"hidden": true,
|
||||
"generator": "Ninja",
|
||||
"binaryDir": "${sourceDir}/build/${presetName}",
|
||||
"toolchainFile": "${sourceDir}/cmake/gcc-arm-none-eabi.cmake",
|
||||
"cacheVariables": {
|
||||
}
|
||||
},
|
||||
{
|
||||
"name": "Debug",
|
||||
"inherits": "default",
|
||||
"cacheVariables": {
|
||||
"CMAKE_BUILD_TYPE": "Debug"
|
||||
}
|
||||
},
|
||||
{
|
||||
"name": "Release",
|
||||
"inherits": "default",
|
||||
"cacheVariables": {
|
||||
"CMAKE_BUILD_TYPE": "Release"
|
||||
}
|
||||
}
|
||||
],
|
||||
"buildPresets": [
|
||||
{
|
||||
"name": "Debug",
|
||||
"configurePreset": "Debug"
|
||||
},
|
||||
{
|
||||
"name": "Release",
|
||||
"configurePreset": "Release"
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -1,370 +0,0 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : freertos.c
|
||||
* Description : Code for freertos applications
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2026 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "FreeRTOS.h"
|
||||
#include "task.h"
|
||||
#include "main.h"
|
||||
#include "cmsis_os.h"
|
||||
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
#include "semphr.h"
|
||||
#include "stream_buffer.h"
|
||||
|
||||
/* Application modules */
|
||||
#include "tcp_server.h"
|
||||
#include "tcp_client.h"
|
||||
#include "uart_trans.h"
|
||||
#include "config.h"
|
||||
#include "ethernetif.h"
|
||||
|
||||
/* LwIP includes */
|
||||
#include "lwip/tcpip.h"
|
||||
#include "lwip/ip4_addr.h"
|
||||
#include "lwip/dhcp.h"
|
||||
#include "lwip/timeouts.h"
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
|
||||
/* USER CODE END PTD */
|
||||
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PD */
|
||||
/* Task stack sizes (words, not bytes) */
|
||||
#define LWIP_TASK_STACK_SIZE 384
|
||||
#define TCP_SERVER_TASK_STACK_SIZE 320
|
||||
#define TCP_CLIENT_TASK_STACK_SIZE 320
|
||||
#define UART_TRANS_TASK_STACK_SIZE 192
|
||||
#define CONFIG_TASK_STACK_SIZE 256
|
||||
#define DEFAULT_TASK_STACK_SIZE 128
|
||||
|
||||
/* Task priorities */
|
||||
#define LWIP_TASK_PRIORITY (osPriorityAboveNormal)
|
||||
#define TCP_SERVER_TASK_PRIORITY (osPriorityNormal)
|
||||
#define TCP_CLIENT_TASK_PRIORITY (osPriorityNormal)
|
||||
#define UART_TRANS_TASK_PRIORITY (osPriorityNormal)
|
||||
#define CONFIG_TASK_PRIORITY (osPriorityBelowNormal)
|
||||
#define DEFAULT_TASK_PRIORITY (osPriorityLow)
|
||||
/* USER CODE END PD */
|
||||
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PM */
|
||||
|
||||
/* USER CODE END PM */
|
||||
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Variables */
|
||||
/* Task handles */
|
||||
TaskHandle_t lwipTaskHandle = NULL;
|
||||
TaskHandle_t tcpServerTaskHandle = NULL;
|
||||
TaskHandle_t tcpClientTaskHandle = NULL;
|
||||
TaskHandle_t uartServerTransTaskHandle = NULL;
|
||||
TaskHandle_t uartClientTransTaskHandle = NULL;
|
||||
TaskHandle_t configTaskHandle = NULL;
|
||||
|
||||
/* SPI mutex for CH390 access */
|
||||
SemaphoreHandle_t ch390SpiMutex = NULL;
|
||||
|
||||
/* CH390 interrupt notification semaphore */
|
||||
SemaphoreHandle_t ch390IntSemaphore = NULL;
|
||||
/* USER CODE END Variables */
|
||||
|
||||
/* Definitions for defaultTask */
|
||||
osThreadId_t defaultTaskHandle;
|
||||
const osThreadAttr_t defaultTask_attributes = {
|
||||
.name = "defaultTask",
|
||||
.stack_size = DEFAULT_TASK_STACK_SIZE * 4,
|
||||
.priority = (osPriority_t) DEFAULT_TASK_PRIORITY,
|
||||
};
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* USER CODE BEGIN FunctionPrototypes */
|
||||
void LwIPTask(void *argument);
|
||||
/* USER CODE END FunctionPrototypes */
|
||||
|
||||
void StartDefaultTask(void *argument);
|
||||
|
||||
void MX_FREERTOS_Init(void); /* (MISRA C 2004 rule 8.1) */
|
||||
|
||||
/**
|
||||
* @brief FreeRTOS initialization
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void MX_FREERTOS_Init(void) {
|
||||
/* USER CODE BEGIN Init */
|
||||
|
||||
/* USER CODE END Init */
|
||||
|
||||
/* USER CODE BEGIN RTOS_MUTEX */
|
||||
/* Create SPI mutex for CH390 access */
|
||||
ch390SpiMutex = xSemaphoreCreateMutex();
|
||||
configASSERT(ch390SpiMutex != NULL);
|
||||
/* USER CODE END RTOS_MUTEX */
|
||||
|
||||
/* USER CODE BEGIN RTOS_SEMAPHORES */
|
||||
/* Create CH390 interrupt notification semaphore */
|
||||
ch390IntSemaphore = xSemaphoreCreateBinary();
|
||||
configASSERT(ch390IntSemaphore != NULL);
|
||||
/* USER CODE END RTOS_SEMAPHORES */
|
||||
|
||||
/* USER CODE BEGIN RTOS_TIMERS */
|
||||
/* start timers, add new ones, ... */
|
||||
/* USER CODE END RTOS_TIMERS */
|
||||
|
||||
/* USER CODE BEGIN RTOS_QUEUES */
|
||||
/* add queues, ... */
|
||||
/* USER CODE END RTOS_QUEUES */
|
||||
|
||||
/* Create the thread(s) */
|
||||
/* creation of defaultTask */
|
||||
defaultTaskHandle = osThreadNew(StartDefaultTask, NULL, &defaultTask_attributes);
|
||||
|
||||
/* USER CODE BEGIN RTOS_THREADS */
|
||||
BaseType_t task_created;
|
||||
|
||||
/* Create LwIP task (handles network stack + TCP server/client) */
|
||||
task_created = xTaskCreate(LwIPTask, "LwIP", LWIP_TASK_STACK_SIZE, NULL,
|
||||
tskIDLE_PRIORITY + 3, &lwipTaskHandle);
|
||||
configASSERT(task_created == pdPASS);
|
||||
|
||||
/* Create TCP Server task */
|
||||
task_created = xTaskCreate(tcp_server_task, "TCPServer", TCP_SERVER_TASK_STACK_SIZE, NULL,
|
||||
tskIDLE_PRIORITY + 2, &tcpServerTaskHandle);
|
||||
configASSERT(task_created == pdPASS);
|
||||
|
||||
/* Create TCP Client task */
|
||||
task_created = xTaskCreate(tcp_client_task, "TCPClient", TCP_CLIENT_TASK_STACK_SIZE, NULL,
|
||||
tskIDLE_PRIORITY + 2, &tcpClientTaskHandle);
|
||||
configASSERT(task_created == pdPASS);
|
||||
|
||||
/* Create UART Server transparent transmission task */
|
||||
task_created = xTaskCreate(uart_server_trans_task, "UartSrvTx", UART_TRANS_TASK_STACK_SIZE, NULL,
|
||||
tskIDLE_PRIORITY + 2, &uartServerTransTaskHandle);
|
||||
configASSERT(task_created == pdPASS);
|
||||
|
||||
/* Create UART Client transparent transmission task */
|
||||
task_created = xTaskCreate(uart_client_trans_task, "UartCliTx", UART_TRANS_TASK_STACK_SIZE, NULL,
|
||||
tskIDLE_PRIORITY + 2, &uartClientTransTaskHandle);
|
||||
configASSERT(task_created == pdPASS);
|
||||
|
||||
/* Create Configuration task (AT commands via UART1) */
|
||||
task_created = xTaskCreate(config_task, "Config", CONFIG_TASK_STACK_SIZE, NULL,
|
||||
tskIDLE_PRIORITY + 1, &configTaskHandle);
|
||||
configASSERT(task_created == pdPASS);
|
||||
/* USER CODE END RTOS_THREADS */
|
||||
|
||||
/* USER CODE BEGIN RTOS_EVENTS */
|
||||
/* add events, ... */
|
||||
/* USER CODE END RTOS_EVENTS */
|
||||
|
||||
}
|
||||
|
||||
/* USER CODE BEGIN Header_StartDefaultTask */
|
||||
/**
|
||||
* @brief Function implementing the defaultTask thread.
|
||||
* LED blinking for system status indication.
|
||||
* @param argument: Not used
|
||||
* @retval None
|
||||
*/
|
||||
/* USER CODE END Header_StartDefaultTask */
|
||||
void StartDefaultTask(void *argument)
|
||||
{
|
||||
/* USER CODE BEGIN StartDefaultTask */
|
||||
(void)argument;
|
||||
|
||||
/* Infinite loop - LED heartbeat */
|
||||
for(;;)
|
||||
{
|
||||
/* Toggle LED (PC13, active low) */
|
||||
HAL_GPIO_TogglePin(GPIOC, GPIO_PIN_13);
|
||||
|
||||
/* 500ms toggle = 1Hz blink rate */
|
||||
osDelay(500);
|
||||
}
|
||||
/* USER CODE END StartDefaultTask */
|
||||
}
|
||||
|
||||
/* Private application code --------------------------------------------------*/
|
||||
/* USER CODE BEGIN Application */
|
||||
|
||||
/**
|
||||
* @brief LwIP task - handles network stack initialization and processing
|
||||
*/
|
||||
void LwIPTask(void *argument)
|
||||
{
|
||||
(void)argument;
|
||||
|
||||
ip4_addr_t ipaddr, netmask, gw;
|
||||
uart_config_t uart_server_cfg;
|
||||
uart_config_t uart_client_cfg;
|
||||
uint8_t use_dhcp = 0;
|
||||
const device_config_t *cfg;
|
||||
|
||||
/* Wait for configuration to be loaded */
|
||||
vTaskDelay(pdMS_TO_TICKS(100));
|
||||
|
||||
/* Get device configuration */
|
||||
cfg = config_get();
|
||||
|
||||
/* Initialize UART transparent transmission module */
|
||||
uart_trans_init();
|
||||
|
||||
/* Apply UART settings from configuration */
|
||||
uart_server_cfg.baudrate = UART_DEFAULT_BAUDRATE;
|
||||
uart_server_cfg.data_bits = UART_DEFAULT_DATA_BITS;
|
||||
uart_server_cfg.stop_bits = UART_DEFAULT_STOP_BITS;
|
||||
uart_server_cfg.parity = UART_DEFAULT_PARITY;
|
||||
|
||||
uart_client_cfg.baudrate = UART_DEFAULT_BAUDRATE;
|
||||
uart_client_cfg.data_bits = UART_DEFAULT_DATA_BITS;
|
||||
uart_client_cfg.stop_bits = UART_DEFAULT_STOP_BITS;
|
||||
uart_client_cfg.parity = UART_DEFAULT_PARITY;
|
||||
|
||||
if (cfg != NULL)
|
||||
{
|
||||
uart_server_cfg.baudrate = cfg->uart2_baudrate;
|
||||
uart_server_cfg.data_bits = cfg->uart2_databits;
|
||||
uart_server_cfg.stop_bits = cfg->uart2_stopbits;
|
||||
uart_server_cfg.parity = cfg->uart2_parity;
|
||||
|
||||
uart_client_cfg.baudrate = cfg->uart3_baudrate;
|
||||
uart_client_cfg.data_bits = cfg->uart3_databits;
|
||||
uart_client_cfg.stop_bits = cfg->uart3_stopbits;
|
||||
uart_client_cfg.parity = cfg->uart3_parity;
|
||||
}
|
||||
|
||||
(void)uart_trans_config(UART_CHANNEL_SERVER, &uart_server_cfg);
|
||||
(void)uart_trans_config(UART_CHANNEL_CLIENT, &uart_client_cfg);
|
||||
|
||||
/* Wait for TCP tasks to initialize their StreamBuffers */
|
||||
/* TCP Server and TCP Client tasks call tcp_server_init() / tcp_client_init() */
|
||||
/* which create the StreamBuffers. We need to wait until they're ready. */
|
||||
while (tcp_server_get_rx_stream() == NULL ||
|
||||
tcp_server_get_tx_stream() == NULL ||
|
||||
tcp_client_get_rx_stream() == NULL ||
|
||||
tcp_client_get_tx_stream() == NULL)
|
||||
{
|
||||
vTaskDelay(pdMS_TO_TICKS(50));
|
||||
}
|
||||
|
||||
/* Connect StreamBuffers between TCP and UART modules */
|
||||
/* Server: TCP Server RX -> UART2 TX, UART2 RX -> TCP Server TX */
|
||||
uart_trans_set_streams(UART_CHANNEL_SERVER,
|
||||
tcp_server_get_rx_stream(), /* TCP RX -> UART TX */
|
||||
tcp_server_get_tx_stream()); /* UART RX -> TCP TX */
|
||||
|
||||
/* Client: TCP Client RX -> UART3 TX, UART3 RX -> TCP Client TX */
|
||||
uart_trans_set_streams(UART_CHANNEL_CLIENT,
|
||||
tcp_client_get_rx_stream(), /* TCP RX -> UART TX */
|
||||
tcp_client_get_tx_stream()); /* UART RX -> TCP TX */
|
||||
|
||||
/* Initialize LwIP stack (calls tcpip_init internally) */
|
||||
tcpip_init(NULL, NULL);
|
||||
|
||||
/* Wait for tcpip thread to initialize */
|
||||
vTaskDelay(pdMS_TO_TICKS(100));
|
||||
|
||||
/* Set IP addresses */
|
||||
if (cfg != NULL && cfg->dhcp_enable != 0)
|
||||
{
|
||||
use_dhcp = 1;
|
||||
IP4_ADDR(&ipaddr, 0, 0, 0, 0);
|
||||
IP4_ADDR(&netmask, 0, 0, 0, 0);
|
||||
IP4_ADDR(&gw, 0, 0, 0, 0);
|
||||
}
|
||||
else if (cfg != NULL)
|
||||
{
|
||||
IP4_ADDR(&ipaddr, cfg->ip[0], cfg->ip[1], cfg->ip[2], cfg->ip[3]);
|
||||
IP4_ADDR(&netmask, cfg->mask[0], cfg->mask[1], cfg->mask[2], cfg->mask[3]);
|
||||
IP4_ADDR(&gw, cfg->gw[0], cfg->gw[1], cfg->gw[2], cfg->gw[3]);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Default IP if no config */
|
||||
IP4_ADDR(&ipaddr, 192, 168, 1, 200);
|
||||
IP4_ADDR(&netmask, 255, 255, 255, 0);
|
||||
IP4_ADDR(&gw, 192, 168, 1, 1);
|
||||
}
|
||||
|
||||
/* Initialize network interface */
|
||||
lwip_netif_init(&ipaddr, &netmask, &gw);
|
||||
|
||||
if (use_dhcp)
|
||||
{
|
||||
dhcp_start(&ch390_netif);
|
||||
}
|
||||
|
||||
/* Main loop - handle network events */
|
||||
for (;;)
|
||||
{
|
||||
/* Wait for CH390 interrupt or timeout */
|
||||
if (xSemaphoreTake(ch390IntSemaphore, pdMS_TO_TICKS(10)) == pdTRUE)
|
||||
{
|
||||
/* Process network input - poll all pending packets */
|
||||
ethernetif_poll();
|
||||
}
|
||||
|
||||
/* Check link status periodically */
|
||||
ethernetif_check_link();
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get SPI mutex handle for CH390 driver
|
||||
*/
|
||||
SemaphoreHandle_t get_ch390_spi_mutex(void)
|
||||
{
|
||||
return ch390SpiMutex;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Notify LwIP task of CH390 interrupt (call from ISR)
|
||||
*/
|
||||
void notify_ch390_interrupt_from_isr(void)
|
||||
{
|
||||
BaseType_t xHigherPriorityTaskWoken = pdFALSE;
|
||||
|
||||
if (ch390IntSemaphore != NULL)
|
||||
{
|
||||
xSemaphoreGiveFromISR(ch390IntSemaphore, &xHigherPriorityTaskWoken);
|
||||
portYIELD_FROM_ISR(xHigherPriorityTaskWoken);
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get UART Server transparent task handle
|
||||
*/
|
||||
TaskHandle_t get_uart_server_task_handle(void)
|
||||
{
|
||||
return uartServerTransTaskHandle;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Get UART Client transparent task handle
|
||||
*/
|
||||
TaskHandle_t get_uart_client_task_handle(void)
|
||||
{
|
||||
return uartClientTransTaskHandle;
|
||||
}
|
||||
|
||||
/* USER CODE END Application */
|
||||
+1
-1
@@ -65,7 +65,7 @@ void MX_GPIO_Init(void)
|
||||
|
||||
/*Configure GPIO pin : PB0 */
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_0;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
|
||||
|
||||
@@ -364,7 +364,9 @@ void Error_Handler(void)
|
||||
{
|
||||
/* USER CODE BEGIN Error_Handler_Debug */
|
||||
/* User can add his own implementation to report the HAL error return state */
|
||||
SEGGER_RTT_WriteString(0, "\r\nError_Handler hit\r\n");
|
||||
__disable_irq();
|
||||
__BKPT(0);
|
||||
while (1)
|
||||
{
|
||||
}
|
||||
|
||||
@@ -71,8 +71,6 @@ void HAL_MspInit(void)
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
/* System interrupt init*/
|
||||
/* PendSV_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(PendSV_IRQn, 15, 0);
|
||||
|
||||
/** NOJTAG: JTAG-DP Disabled and SW-DP Enabled
|
||||
*/
|
||||
|
||||
@@ -0,0 +1,244 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file syscalls.c
|
||||
* @author Auto-generated by STM32CubeMX
|
||||
* @brief Minimal System calls file
|
||||
*
|
||||
* For more information about which c-functions
|
||||
* need which of these lowlevel functions
|
||||
* please consult the Newlib or Picolibc libc-manual
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2020-2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes */
|
||||
#include <sys/stat.h>
|
||||
#include <stdlib.h>
|
||||
#include <errno.h>
|
||||
#include <stdio.h>
|
||||
#include <signal.h>
|
||||
#include <time.h>
|
||||
#include <sys/time.h>
|
||||
#include <sys/times.h>
|
||||
|
||||
|
||||
/* Variables */
|
||||
extern int __io_putchar(int ch) __attribute__((weak));
|
||||
extern int __io_getchar(void) __attribute__((weak));
|
||||
|
||||
|
||||
char *__env[1] = { 0 };
|
||||
char **environ = __env;
|
||||
|
||||
|
||||
/* Functions */
|
||||
void initialise_monitor_handles()
|
||||
{
|
||||
}
|
||||
|
||||
int _getpid(void)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
int _kill(int pid, int sig)
|
||||
{
|
||||
(void)pid;
|
||||
(void)sig;
|
||||
errno = EINVAL;
|
||||
return -1;
|
||||
}
|
||||
|
||||
void _exit (int status)
|
||||
{
|
||||
_kill(status, -1);
|
||||
while (1) {} /* Make sure we hang here */
|
||||
}
|
||||
|
||||
__attribute__((weak)) int _read(int file, char *ptr, int len)
|
||||
{
|
||||
(void)file;
|
||||
int DataIdx;
|
||||
|
||||
for (DataIdx = 0; DataIdx < len; DataIdx++)
|
||||
{
|
||||
*ptr++ = __io_getchar();
|
||||
}
|
||||
|
||||
return len;
|
||||
}
|
||||
|
||||
__attribute__((weak)) int _write(int file, char *ptr, int len)
|
||||
{
|
||||
(void)file;
|
||||
int DataIdx;
|
||||
|
||||
for (DataIdx = 0; DataIdx < len; DataIdx++)
|
||||
{
|
||||
__io_putchar(*ptr++);
|
||||
}
|
||||
return len;
|
||||
}
|
||||
|
||||
int _close(int file)
|
||||
{
|
||||
(void)file;
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
||||
int _fstat(int file, struct stat *st)
|
||||
{
|
||||
(void)file;
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _isatty(int file)
|
||||
{
|
||||
(void)file;
|
||||
return 1;
|
||||
}
|
||||
|
||||
int _lseek(int file, int ptr, int dir)
|
||||
{
|
||||
(void)file;
|
||||
(void)ptr;
|
||||
(void)dir;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _open(char *path, int flags, ...)
|
||||
{
|
||||
(void)path;
|
||||
(void)flags;
|
||||
/* Pretend like we always fail */
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _wait(int *status)
|
||||
{
|
||||
(void)status;
|
||||
errno = ECHILD;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _unlink(char *name)
|
||||
{
|
||||
(void)name;
|
||||
errno = ENOENT;
|
||||
return -1;
|
||||
}
|
||||
|
||||
clock_t _times(struct tms *buf)
|
||||
{
|
||||
(void)buf;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _stat(const char *file, struct stat *st)
|
||||
{
|
||||
(void)file;
|
||||
st->st_mode = S_IFCHR;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int _link(char *old, char *new)
|
||||
{
|
||||
(void)old;
|
||||
(void)new;
|
||||
errno = EMLINK;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _fork(void)
|
||||
{
|
||||
errno = EAGAIN;
|
||||
return -1;
|
||||
}
|
||||
|
||||
int _execve(char *name, char **argv, char **env)
|
||||
{
|
||||
(void)name;
|
||||
(void)argv;
|
||||
(void)env;
|
||||
errno = ENOMEM;
|
||||
return -1;
|
||||
}
|
||||
|
||||
// --- Picolibc Specific Section ---
|
||||
#if defined(__PICOLIBC__)
|
||||
|
||||
/**
|
||||
* @brief Picolibc helper function to output a character to a FILE stream.
|
||||
* This redirects the output to the low-level __io_putchar function.
|
||||
* @param c Character to write.
|
||||
* @param file FILE stream pointer (ignored).
|
||||
* @retval int The character written.
|
||||
*/
|
||||
static int starm_putc(char c, FILE *file)
|
||||
{
|
||||
(void) file;
|
||||
__io_putchar(c);
|
||||
return c;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Picolibc helper function to input a character from a FILE stream.
|
||||
* This redirects the input from the low-level __io_getchar function.
|
||||
* @param file FILE stream pointer (ignored).
|
||||
* @retval int The character read, cast to an unsigned char then int.
|
||||
*/
|
||||
static int starm_getc(FILE *file)
|
||||
{
|
||||
unsigned char c;
|
||||
(void) file;
|
||||
c = __io_getchar();
|
||||
return c;
|
||||
}
|
||||
|
||||
// Define and initialize the standard I/O streams for Picolibc.
|
||||
// FDEV_SETUP_STREAM connects the starm_putc and starm_getc helper functions to a FILE structure.
|
||||
// _FDEV_SETUP_RW indicates the stream is for reading and writing.
|
||||
static FILE __stdio = FDEV_SETUP_STREAM(starm_putc,
|
||||
starm_getc,
|
||||
NULL,
|
||||
_FDEV_SETUP_RW);
|
||||
|
||||
// Assign the standard stream pointers (stdin, stdout, stderr) to the initialized stream.
|
||||
// Picolibc uses these pointers for standard I/O operations (printf, scanf, etc.).
|
||||
FILE *const stdin = &__stdio;
|
||||
__strong_reference(stdin, stdout);
|
||||
__strong_reference(stdin, stderr);
|
||||
|
||||
// Create strong aliases mapping standard C library function names (without underscore)
|
||||
// to the implemented system call stubs (with underscore). Picolibc uses these
|
||||
// standard names internally, so this linking is required.
|
||||
__strong_reference(_read, read);
|
||||
__strong_reference(_write, write);
|
||||
__strong_reference(_times, times);
|
||||
__strong_reference(_execve, execve);
|
||||
__strong_reference(_fork, fork);
|
||||
__strong_reference(_link, link);
|
||||
__strong_reference(_unlink, unlink);
|
||||
__strong_reference(_stat, stat);
|
||||
__strong_reference(_wait, wait);
|
||||
__strong_reference(_open, open);
|
||||
__strong_reference(_close, close);
|
||||
__strong_reference(_lseek, lseek);
|
||||
__strong_reference(_isatty, isatty);
|
||||
__strong_reference(_fstat, fstat);
|
||||
__strong_reference(_exit, exit);
|
||||
__strong_reference(_kill, kill);
|
||||
__strong_reference(_getpid, getpid);
|
||||
|
||||
#endif //__PICOLIBC__
|
||||
@@ -0,0 +1,87 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file sysmem.c
|
||||
* @author Generated by STM32CubeMX
|
||||
* @brief System Memory calls file
|
||||
*
|
||||
* For more information about which C functions
|
||||
* need which of these lowlevel functions
|
||||
* please consult the Newlib or Picolibc libc manual
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2025 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes */
|
||||
#include <errno.h>
|
||||
#include <stdint.h>
|
||||
#include <stddef.h>
|
||||
|
||||
/**
|
||||
* Pointer to the current high watermark of the heap usage
|
||||
*/
|
||||
static uint8_t *__sbrk_heap_end = NULL;
|
||||
|
||||
/**
|
||||
* @brief _sbrk() allocates memory to the newlib heap and is used by malloc
|
||||
* and others from the C library
|
||||
*
|
||||
* @verbatim
|
||||
* ############################################################################
|
||||
* # .data # .bss # newlib heap # MSP stack #
|
||||
* # # # # Reserved by _Min_Stack_Size #
|
||||
* ############################################################################
|
||||
* ^-- RAM start ^-- _end _estack, RAM end --^
|
||||
* @endverbatim
|
||||
*
|
||||
* This implementation starts allocating at the '_end' linker symbol
|
||||
* The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack
|
||||
* The implementation considers '_estack' linker symbol to be RAM end
|
||||
* NOTE: If the MSP stack, at any point during execution, grows larger than the
|
||||
* reserved size, please increase the '_Min_Stack_Size'.
|
||||
*
|
||||
* @param incr Memory size
|
||||
* @return Pointer to allocated memory
|
||||
*/
|
||||
void *_sbrk(ptrdiff_t incr)
|
||||
{
|
||||
extern uint8_t _end; /* Symbol defined in the linker script */
|
||||
extern uint8_t _estack; /* Symbol defined in the linker script */
|
||||
extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */
|
||||
const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size;
|
||||
const uint8_t *max_heap = (uint8_t *)stack_limit;
|
||||
uint8_t *prev_heap_end;
|
||||
|
||||
/* Initialize heap end at first call */
|
||||
if (NULL == __sbrk_heap_end)
|
||||
{
|
||||
__sbrk_heap_end = &_end;
|
||||
}
|
||||
|
||||
/* Protect heap from growing into the reserved MSP stack */
|
||||
if (__sbrk_heap_end + incr > max_heap)
|
||||
{
|
||||
errno = ENOMEM;
|
||||
return (void *)-1;
|
||||
}
|
||||
|
||||
prev_heap_end = __sbrk_heap_end;
|
||||
__sbrk_heap_end += incr;
|
||||
|
||||
return (void *)prev_heap_end;
|
||||
}
|
||||
|
||||
#if defined(__PICOLIBC__)
|
||||
// Picolibc expects syscalls without the leading underscore.
|
||||
// This creates a strong alias so that
|
||||
// calls to `sbrk()` are resolved to our `_sbrk()` implementation.
|
||||
__strong_reference(_sbrk, sbrk);
|
||||
#endif
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -1,313 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f100xb.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F100xB Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD CEC_IRQHandler ; HDMI-CEC
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT CEC_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
CEC_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,344 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f100xe.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F100xE Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system and also configure the external
|
||||
;* SRAM mounted on STM32100E-EVAL board to be used as data
|
||||
;* memory (optional, to be enabled by user)
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD CEC_IRQHandler ; HDMI CEC
|
||||
DCD TIM12_IRQHandler ; TIM12
|
||||
DCD TIM13_IRQHandler ; TIM13
|
||||
DCD TIM14_IRQHandler ; TIM14
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM15_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM16_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM17_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT CEC_IRQHandler [WEAK]
|
||||
EXPORT TIM12_IRQHandler [WEAK]
|
||||
EXPORT TIM13_IRQHandler [WEAK]
|
||||
EXPORT TIM14_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_DAC_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel5_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
CEC_IRQHandler
|
||||
TIM12_IRQHandler
|
||||
TIM13_IRQHandler
|
||||
TIM14_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_DAC_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
DMA2_Channel5_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,276 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f101x6.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F101x6 Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD 0 ; Reserved
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler routine
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,286 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f101xb.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F101xB Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,324 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f101xe.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F101xE Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,336 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f101xg.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F101xG Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM9_IRQHandler ; TIM9
|
||||
DCD TIM10_IRQHandler ; TIM10
|
||||
DCD TIM11_IRQHandler ; TIM11
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM12_IRQHandler ; TIM12
|
||||
DCD TIM13_IRQHandler ; TIM13
|
||||
DCD TIM14_IRQHandler ; TIM14
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM9_IRQHandler [WEAK]
|
||||
EXPORT TIM10_IRQHandler [WEAK]
|
||||
EXPORT TIM11_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT TIM12_IRQHandler [WEAK]
|
||||
EXPORT TIM13_IRQHandler [WEAK]
|
||||
EXPORT TIM14_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM9_IRQHandler
|
||||
TIM10_IRQHandler
|
||||
TIM11_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
TIM12_IRQHandler
|
||||
TIM13_IRQHandler
|
||||
TIM14_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,283 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f102x6.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F102x6 Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD USB_HP_IRQHandler ; USB High Priority
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD 0 ; Reserved
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler routine
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
USB_HP_IRQHandler
|
||||
USB_LP_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,293 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f102xb.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F102xB Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD USB_HP_IRQHandler ; USB High Priority
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_IRQHandler
|
||||
USB_HP_IRQHandler
|
||||
USB_LP_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,295 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f103x6.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F103x6 Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1_2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD 0 ; Reserved
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler routine
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_IRQHandler
|
||||
TIM1_UP_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,305 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f103xb.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F103xB Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1_2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_IRQHandler
|
||||
TIM1_UP_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,354 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f103xe.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F103xE Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
DCD TIM8_BRK_IRQHandler ; TIM8 Break
|
||||
DCD TIM8_UP_IRQHandler ; TIM8 Update
|
||||
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD ADC3_IRQHandler ; ADC3
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT ADC3_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT SDIO_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_IRQHandler
|
||||
TIM1_UP_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
TIM8_BRK_IRQHandler
|
||||
TIM8_UP_IRQHandler
|
||||
TIM8_TRG_COM_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
ADC3_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
SDIO_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,354 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f103xg.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F103xG Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD ADC3_IRQHandler ; ADC3
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_TIM10_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_TIM13_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT ADC3_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT SDIO_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
ADC3_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
SDIO_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,362 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f105xc.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F105xC Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C1 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC alarm through EXTI line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel5_IRQHandler [WEAK]
|
||||
EXPORT CAN2_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN2_SCE_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_IRQHandler
|
||||
TIM1_UP_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_IRQHandler
|
||||
DMA2_Channel5_IRQHandler
|
||||
CAN2_TX_IRQHandler
|
||||
CAN2_RX0_IRQHandler
|
||||
CAN2_RX1_IRQHandler
|
||||
CAN2_SCE_IRQHandler
|
||||
OTG_FS_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,366 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f107xc.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F107xC Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C1 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC alarm through EXTI line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
|
||||
DCD ETH_IRQHandler ; Ethernet
|
||||
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_WKUP_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel5_IRQHandler [WEAK]
|
||||
EXPORT ETH_IRQHandler [WEAK]
|
||||
EXPORT ETH_WKUP_IRQHandler [WEAK]
|
||||
EXPORT CAN2_TX_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN2_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN2_SCE_IRQHandler [WEAK]
|
||||
EXPORT OTG_FS_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
CAN1_TX_IRQHandler
|
||||
CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_IRQHandler
|
||||
TIM1_UP_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_IRQHandler
|
||||
DMA2_Channel5_IRQHandler
|
||||
ETH_IRQHandler
|
||||
ETH_WKUP_IRQHandler
|
||||
CAN2_TX_IRQHandler
|
||||
CAN2_RX0_IRQHandler
|
||||
CAN2_RX1_IRQHandler
|
||||
CAN2_SCE_IRQHandler
|
||||
OTG_FS_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
@@ -1,407 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f100xb.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F100xB Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_TIM15_IRQHandler
|
||||
.word TIM1_UP_TIM16_IRQHandler
|
||||
.word TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word CEC_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM6_DAC_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x01CC. This is for boot in RAM mode for
|
||||
STM32F10xB Value Line devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM15_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM16_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak CEC_IRQHandler
|
||||
.thumb_set CEC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
|
||||
@@ -1,449 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f100xe.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F100xE Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_TIM15_IRQHandler
|
||||
.word TIM1_UP_TIM16_IRQHandler
|
||||
.word TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word CEC_IRQHandler
|
||||
.word TIM12_IRQHandler
|
||||
.word TIM13_IRQHandler
|
||||
.word TIM14_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_DAC_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_5_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x High Density Value line devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM15_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM16_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM17_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak CEC_IRQHandler
|
||||
.thumb_set CEC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM12_IRQHandler
|
||||
.thumb_set TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM13_IRQHandler
|
||||
.thumb_set TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM14_IRQHandler
|
||||
.thumb_set TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_DAC_IRQHandler
|
||||
.thumb_set TIM6_DAC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_5_IRQHandler
|
||||
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
|
||||
@@ -1,322 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f101x6.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F101x6 Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word 0
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word SPI1_IRQHandler
|
||||
.word 0
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word 0
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32F10x Low Density devices.*/
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
@@ -1,338 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f101xb.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F101xB Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32F10x Medium Density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
|
||||
|
||||
@@ -1,423 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f101xe.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F101xE Value Line Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word FSMC_IRQHandler
|
||||
.word 0
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x High Density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_5_IRQHandler
|
||||
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
|
||||
|
||||
@@ -1,439 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f101xg.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F101xG Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM9_IRQHandler
|
||||
.word TIM10_IRQHandler
|
||||
.word TIM11_IRQHandler
|
||||
.word 0
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word 0
|
||||
.word TIM12_IRQHandler
|
||||
.word TIM13_IRQHandler
|
||||
.word TIM14_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word FSMC_IRQHandler
|
||||
.word 0
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x XL-Density devices. */
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM9_IRQHandler
|
||||
.thumb_set TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM10_IRQHandler
|
||||
.thumb_set TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM11_IRQHandler
|
||||
.thumb_set TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM12_IRQHandler
|
||||
.thumb_set TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM13_IRQHandler
|
||||
.thumb_set TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM14_IRQHandler
|
||||
.thumb_set TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_5_IRQHandler
|
||||
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
|
||||
|
||||
@@ -1,330 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f102x6.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F102x6 Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word 0
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word SPI1_IRQHandler
|
||||
.word 0
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word 0
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32F10x Low Density devices.*/
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
@@ -1,346 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f102xb.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F102xB Value Line Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_IRQHandler
|
||||
.word USB_HP_IRQHandler
|
||||
.word USB_LP_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32F10x Medium Density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_IRQHandler
|
||||
.thumb_set ADC1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_IRQHandler
|
||||
.thumb_set USB_HP_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_IRQHandler
|
||||
.thumb_set USB_LP_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
|
||||
@@ -1,348 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f103x6.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F103x6 Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF108F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_IRQHandler
|
||||
.word TIM1_UP_IRQHandler
|
||||
.word TIM1_TRG_COM_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word 0
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word SPI1_IRQHandler
|
||||
.word 0
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word 0
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x108. This is for boot in RAM mode for
|
||||
STM32F10x Low Density devices.*/
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
@@ -1,470 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f103xe.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F103xE Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Configure external SRAM mounted on STM3210E-EVAL board
|
||||
* to be used as data memory (optional, to be enabled by user)
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_IRQHandler
|
||||
.word TIM1_UP_IRQHandler
|
||||
.word TIM1_TRG_COM_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word TIM8_BRK_IRQHandler
|
||||
.word TIM8_UP_IRQHandler
|
||||
.word TIM8_TRG_COM_IRQHandler
|
||||
.word TIM8_CC_IRQHandler
|
||||
.word ADC3_IRQHandler
|
||||
.word FSMC_IRQHandler
|
||||
.word SDIO_IRQHandler
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x High Density devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_IRQHandler
|
||||
.thumb_set TIM8_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_IRQHandler
|
||||
.thumb_set TIM8_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC3_IRQHandler
|
||||
.thumb_set ADC3_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_5_IRQHandler
|
||||
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
|
||||
|
||||
@@ -1,466 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f103xb.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F103xB Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word USB_HP_CAN1_TX_IRQHandler
|
||||
.word USB_LP_CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_TIM9_IRQHandler
|
||||
.word TIM1_UP_TIM10_IRQHandler
|
||||
.word TIM1_TRG_COM_TIM11_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word USBWakeUp_IRQHandler
|
||||
.word TIM8_BRK_TIM12_IRQHandler
|
||||
.word TIM8_UP_TIM13_IRQHandler
|
||||
.word TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.word TIM8_CC_IRQHandler
|
||||
.word ADC3_IRQHandler
|
||||
.word FSMC_IRQHandler
|
||||
.word SDIO_IRQHandler
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x XL-Density devices. */
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_HP_CAN1_TX_IRQHandler
|
||||
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak USB_LP_CAN1_RX0_IRQHandler
|
||||
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_TIM9_IRQHandler
|
||||
.thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_TIM10_IRQHandler
|
||||
.thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_TIM11_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak USBWakeUp_IRQHandler
|
||||
.thumb_set USBWakeUp_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_BRK_TIM12_IRQHandler
|
||||
.thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_UP_TIM13_IRQHandler
|
||||
.thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_TRG_COM_TIM14_IRQHandler
|
||||
.thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM8_CC_IRQHandler
|
||||
.thumb_set TIM8_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC3_IRQHandler
|
||||
.thumb_set ADC3_IRQHandler,Default_Handler
|
||||
|
||||
.weak FSMC_IRQHandler
|
||||
.thumb_set FSMC_IRQHandler,Default_Handler
|
||||
|
||||
.weak SDIO_IRQHandler
|
||||
.thumb_set SDIO_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_5_IRQHandler
|
||||
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
|
||||
|
||||
@@ -1,463 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f105xc.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F105xC Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word CAN1_TX_IRQHandler
|
||||
.word CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_IRQHandler
|
||||
.word TIM1_UP_IRQHandler
|
||||
.word TIM1_TRG_COM_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word OTG_FS_WKUP_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word CAN2_TX_IRQHandler
|
||||
.word CAN2_RX0_IRQHandler
|
||||
.word CAN2_RX1_IRQHandler
|
||||
.word CAN2_SCE_IRQHandler
|
||||
.word OTG_FS_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x Connectivity line Devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_TX_IRQHandler
|
||||
.thumb_set CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX0_IRQHandler
|
||||
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_IRQHandler
|
||||
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_TX_IRQHandler
|
||||
.thumb_set CAN2_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX0_IRQHandler
|
||||
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX1_IRQHandler
|
||||
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_SCE_IRQHandler
|
||||
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler ,Default_Handler
|
||||
|
||||
@@ -1,472 +0,0 @@
|
||||
/**
|
||||
*************** (C) COPYRIGHT 2017 STMicroelectronics ************************
|
||||
* @file startup_stm32f107xc.s
|
||||
* @author MCD Application Team
|
||||
* @brief STM32F107xC Devices vector table for Atollic toolchain.
|
||||
* This module performs:
|
||||
* - Set the initial SP
|
||||
* - Set the initial PC == Reset_Handler,
|
||||
* - Set the vector table entries with the exceptions ISR address
|
||||
* - Configure the clock system
|
||||
* - Branches to main in the C library (which eventually
|
||||
* calls main()).
|
||||
* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
* priority is Privileged, and the Stack is set to Main.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
.syntax unified
|
||||
.cpu cortex-m3
|
||||
.fpu softvfp
|
||||
.thumb
|
||||
|
||||
.global g_pfnVectors
|
||||
.global Default_Handler
|
||||
|
||||
/* start address for the initialization values of the .data section.
|
||||
defined in linker script */
|
||||
.word _sidata
|
||||
/* start address for the .data section. defined in linker script */
|
||||
.word _sdata
|
||||
/* end address for the .data section. defined in linker script */
|
||||
.word _edata
|
||||
/* start address for the .bss section. defined in linker script */
|
||||
.word _sbss
|
||||
/* end address for the .bss section. defined in linker script */
|
||||
.word _ebss
|
||||
|
||||
.equ BootRAM, 0xF1E0F85F
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor first
|
||||
* starts execution following a reset event. Only the absolutely
|
||||
* necessary set is performed, after which the application
|
||||
* supplied main() routine is called.
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
|
||||
.section .text.Reset_Handler
|
||||
.weak Reset_Handler
|
||||
.type Reset_Handler, %function
|
||||
Reset_Handler:
|
||||
|
||||
/* Call the clock system initialization function.*/
|
||||
bl SystemInit
|
||||
|
||||
/* Copy the data segment initializers from flash to SRAM */
|
||||
ldr r0, =_sdata
|
||||
ldr r1, =_edata
|
||||
ldr r2, =_sidata
|
||||
movs r3, #0
|
||||
b LoopCopyDataInit
|
||||
|
||||
CopyDataInit:
|
||||
ldr r4, [r2, r3]
|
||||
str r4, [r0, r3]
|
||||
adds r3, r3, #4
|
||||
|
||||
LoopCopyDataInit:
|
||||
adds r4, r0, r3
|
||||
cmp r4, r1
|
||||
bcc CopyDataInit
|
||||
|
||||
/* Zero fill the bss segment. */
|
||||
ldr r2, =_sbss
|
||||
ldr r4, =_ebss
|
||||
movs r3, #0
|
||||
b LoopFillZerobss
|
||||
|
||||
FillZerobss:
|
||||
str r3, [r2]
|
||||
adds r2, r2, #4
|
||||
|
||||
LoopFillZerobss:
|
||||
cmp r2, r4
|
||||
bcc FillZerobss
|
||||
|
||||
|
||||
/* Call static constructors */
|
||||
bl __libc_init_array
|
||||
/* Call the application's entry point.*/
|
||||
bl main
|
||||
bx lr
|
||||
.size Reset_Handler, .-Reset_Handler
|
||||
|
||||
/**
|
||||
* @brief This is the code that gets called when the processor receives an
|
||||
* unexpected interrupt. This simply enters an infinite loop, preserving
|
||||
* the system state for examination by a debugger.
|
||||
*
|
||||
* @param None
|
||||
* @retval : None
|
||||
*/
|
||||
.section .text.Default_Handler,"ax",%progbits
|
||||
Default_Handler:
|
||||
Infinite_Loop:
|
||||
b Infinite_Loop
|
||||
.size Default_Handler, .-Default_Handler
|
||||
|
||||
/******************************************************************************
|
||||
*
|
||||
* The minimal vector table for a Cortex M3. Note that the proper constructs
|
||||
* must be placed on this to ensure that it ends up at physical address
|
||||
* 0x0000.0000.
|
||||
*
|
||||
******************************************************************************/
|
||||
.section .isr_vector,"a",%progbits
|
||||
.type g_pfnVectors, %object
|
||||
.size g_pfnVectors, .-g_pfnVectors
|
||||
|
||||
|
||||
g_pfnVectors:
|
||||
|
||||
.word _estack
|
||||
.word Reset_Handler
|
||||
.word NMI_Handler
|
||||
.word HardFault_Handler
|
||||
.word MemManage_Handler
|
||||
.word BusFault_Handler
|
||||
.word UsageFault_Handler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word SVC_Handler
|
||||
.word DebugMon_Handler
|
||||
.word 0
|
||||
.word PendSV_Handler
|
||||
.word SysTick_Handler
|
||||
.word WWDG_IRQHandler
|
||||
.word PVD_IRQHandler
|
||||
.word TAMPER_IRQHandler
|
||||
.word RTC_IRQHandler
|
||||
.word FLASH_IRQHandler
|
||||
.word RCC_IRQHandler
|
||||
.word EXTI0_IRQHandler
|
||||
.word EXTI1_IRQHandler
|
||||
.word EXTI2_IRQHandler
|
||||
.word EXTI3_IRQHandler
|
||||
.word EXTI4_IRQHandler
|
||||
.word DMA1_Channel1_IRQHandler
|
||||
.word DMA1_Channel2_IRQHandler
|
||||
.word DMA1_Channel3_IRQHandler
|
||||
.word DMA1_Channel4_IRQHandler
|
||||
.word DMA1_Channel5_IRQHandler
|
||||
.word DMA1_Channel6_IRQHandler
|
||||
.word DMA1_Channel7_IRQHandler
|
||||
.word ADC1_2_IRQHandler
|
||||
.word CAN1_TX_IRQHandler
|
||||
.word CAN1_RX0_IRQHandler
|
||||
.word CAN1_RX1_IRQHandler
|
||||
.word CAN1_SCE_IRQHandler
|
||||
.word EXTI9_5_IRQHandler
|
||||
.word TIM1_BRK_IRQHandler
|
||||
.word TIM1_UP_IRQHandler
|
||||
.word TIM1_TRG_COM_IRQHandler
|
||||
.word TIM1_CC_IRQHandler
|
||||
.word TIM2_IRQHandler
|
||||
.word TIM3_IRQHandler
|
||||
.word TIM4_IRQHandler
|
||||
.word I2C1_EV_IRQHandler
|
||||
.word I2C1_ER_IRQHandler
|
||||
.word I2C2_EV_IRQHandler
|
||||
.word I2C2_ER_IRQHandler
|
||||
.word SPI1_IRQHandler
|
||||
.word SPI2_IRQHandler
|
||||
.word USART1_IRQHandler
|
||||
.word USART2_IRQHandler
|
||||
.word USART3_IRQHandler
|
||||
.word EXTI15_10_IRQHandler
|
||||
.word RTC_Alarm_IRQHandler
|
||||
.word OTG_FS_WKUP_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word TIM5_IRQHandler
|
||||
.word SPI3_IRQHandler
|
||||
.word UART4_IRQHandler
|
||||
.word UART5_IRQHandler
|
||||
.word TIM6_IRQHandler
|
||||
.word TIM7_IRQHandler
|
||||
.word DMA2_Channel1_IRQHandler
|
||||
.word DMA2_Channel2_IRQHandler
|
||||
.word DMA2_Channel3_IRQHandler
|
||||
.word DMA2_Channel4_IRQHandler
|
||||
.word DMA2_Channel5_IRQHandler
|
||||
.word ETH_IRQHandler
|
||||
.word ETH_WKUP_IRQHandler
|
||||
.word CAN2_TX_IRQHandler
|
||||
.word CAN2_RX0_IRQHandler
|
||||
.word CAN2_RX1_IRQHandler
|
||||
.word CAN2_SCE_IRQHandler
|
||||
.word OTG_FS_IRQHandler
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word 0
|
||||
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
|
||||
STM32F10x Connectivity line Devices. */
|
||||
|
||||
/*******************************************************************************
|
||||
*
|
||||
* Provide weak aliases for each Exception handler to the Default_Handler.
|
||||
* As they are weak aliases, any function with the same name will override
|
||||
* this definition.
|
||||
*
|
||||
*******************************************************************************/
|
||||
.weak NMI_Handler
|
||||
.thumb_set NMI_Handler,Default_Handler
|
||||
|
||||
.weak HardFault_Handler
|
||||
.thumb_set HardFault_Handler,Default_Handler
|
||||
|
||||
.weak MemManage_Handler
|
||||
.thumb_set MemManage_Handler,Default_Handler
|
||||
|
||||
.weak BusFault_Handler
|
||||
.thumb_set BusFault_Handler,Default_Handler
|
||||
|
||||
.weak UsageFault_Handler
|
||||
.thumb_set UsageFault_Handler,Default_Handler
|
||||
|
||||
.weak SVC_Handler
|
||||
.thumb_set SVC_Handler,Default_Handler
|
||||
|
||||
.weak DebugMon_Handler
|
||||
.thumb_set DebugMon_Handler,Default_Handler
|
||||
|
||||
.weak PendSV_Handler
|
||||
.thumb_set PendSV_Handler,Default_Handler
|
||||
|
||||
.weak SysTick_Handler
|
||||
.thumb_set SysTick_Handler,Default_Handler
|
||||
|
||||
.weak WWDG_IRQHandler
|
||||
.thumb_set WWDG_IRQHandler,Default_Handler
|
||||
|
||||
.weak PVD_IRQHandler
|
||||
.thumb_set PVD_IRQHandler,Default_Handler
|
||||
|
||||
.weak TAMPER_IRQHandler
|
||||
.thumb_set TAMPER_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_IRQHandler
|
||||
.thumb_set RTC_IRQHandler,Default_Handler
|
||||
|
||||
.weak FLASH_IRQHandler
|
||||
.thumb_set FLASH_IRQHandler,Default_Handler
|
||||
|
||||
.weak RCC_IRQHandler
|
||||
.thumb_set RCC_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI0_IRQHandler
|
||||
.thumb_set EXTI0_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI1_IRQHandler
|
||||
.thumb_set EXTI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI2_IRQHandler
|
||||
.thumb_set EXTI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI3_IRQHandler
|
||||
.thumb_set EXTI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI4_IRQHandler
|
||||
.thumb_set EXTI4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel1_IRQHandler
|
||||
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel2_IRQHandler
|
||||
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel3_IRQHandler
|
||||
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel4_IRQHandler
|
||||
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel5_IRQHandler
|
||||
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel6_IRQHandler
|
||||
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA1_Channel7_IRQHandler
|
||||
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
|
||||
|
||||
.weak ADC1_2_IRQHandler
|
||||
.thumb_set ADC1_2_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_TX_IRQHandler
|
||||
.thumb_set CAN1_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX0_IRQHandler
|
||||
.thumb_set CAN1_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_RX1_IRQHandler
|
||||
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN1_SCE_IRQHandler
|
||||
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI9_5_IRQHandler
|
||||
.thumb_set EXTI9_5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_BRK_IRQHandler
|
||||
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_UP_IRQHandler
|
||||
.thumb_set TIM1_UP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_TRG_COM_IRQHandler
|
||||
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM1_CC_IRQHandler
|
||||
.thumb_set TIM1_CC_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM2_IRQHandler
|
||||
.thumb_set TIM2_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM3_IRQHandler
|
||||
.thumb_set TIM3_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM4_IRQHandler
|
||||
.thumb_set TIM4_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_EV_IRQHandler
|
||||
.thumb_set I2C1_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C1_ER_IRQHandler
|
||||
.thumb_set I2C1_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_EV_IRQHandler
|
||||
.thumb_set I2C2_EV_IRQHandler,Default_Handler
|
||||
|
||||
.weak I2C2_ER_IRQHandler
|
||||
.thumb_set I2C2_ER_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI1_IRQHandler
|
||||
.thumb_set SPI1_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI2_IRQHandler
|
||||
.thumb_set SPI2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART1_IRQHandler
|
||||
.thumb_set USART1_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART2_IRQHandler
|
||||
.thumb_set USART2_IRQHandler,Default_Handler
|
||||
|
||||
.weak USART3_IRQHandler
|
||||
.thumb_set USART3_IRQHandler,Default_Handler
|
||||
|
||||
.weak EXTI15_10_IRQHandler
|
||||
.thumb_set EXTI15_10_IRQHandler,Default_Handler
|
||||
|
||||
.weak RTC_Alarm_IRQHandler
|
||||
.thumb_set RTC_Alarm_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_WKUP_IRQHandler
|
||||
.thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM5_IRQHandler
|
||||
.thumb_set TIM5_IRQHandler,Default_Handler
|
||||
|
||||
.weak SPI3_IRQHandler
|
||||
.thumb_set SPI3_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART4_IRQHandler
|
||||
.thumb_set UART4_IRQHandler,Default_Handler
|
||||
|
||||
.weak UART5_IRQHandler
|
||||
.thumb_set UART5_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM6_IRQHandler
|
||||
.thumb_set TIM6_IRQHandler,Default_Handler
|
||||
|
||||
.weak TIM7_IRQHandler
|
||||
.thumb_set TIM7_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel1_IRQHandler
|
||||
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel2_IRQHandler
|
||||
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel3_IRQHandler
|
||||
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel4_IRQHandler
|
||||
.thumb_set DMA2_Channel4_IRQHandler,Default_Handler
|
||||
|
||||
.weak DMA2_Channel5_IRQHandler
|
||||
.thumb_set DMA2_Channel5_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_IRQHandler
|
||||
.thumb_set ETH_IRQHandler,Default_Handler
|
||||
|
||||
.weak ETH_WKUP_IRQHandler
|
||||
.thumb_set ETH_WKUP_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_TX_IRQHandler
|
||||
.thumb_set CAN2_TX_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX0_IRQHandler
|
||||
.thumb_set CAN2_RX0_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_RX1_IRQHandler
|
||||
.thumb_set CAN2_RX1_IRQHandler,Default_Handler
|
||||
|
||||
.weak CAN2_SCE_IRQHandler
|
||||
.thumb_set CAN2_SCE_IRQHandler,Default_Handler
|
||||
|
||||
.weak OTG_FS_IRQHandler
|
||||
.thumb_set OTG_FS_IRQHandler ,Default_Handler
|
||||
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20001FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20001FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20007FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x08007FFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x200017FF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x200017FF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20003FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20003FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2000BFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2000BFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20013FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20013FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x08007FFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x200017FF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x200017FF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20003FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20003FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x08007FFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x200027FF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x200027FF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20004FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20004FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2000FFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2000FFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20017FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x20017FFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x0803FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2000FFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2000FFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x08000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x0803FFFF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2000FFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,31 +0,0 @@
|
||||
/*###ICF### Section handled by ICF editor, don't touch! ****/
|
||||
/*-Editor annotation file-*/
|
||||
/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
|
||||
/*-Specials-*/
|
||||
define symbol __ICFEDIT_intvec_start__ = 0x20000000;
|
||||
/*-Memory Regions-*/
|
||||
define symbol __ICFEDIT_region_ROM_start__ = 0x20000000 ;
|
||||
define symbol __ICFEDIT_region_ROM_end__ = 0x200013FF;
|
||||
define symbol __ICFEDIT_region_RAM_start__ = 0x20001400;
|
||||
define symbol __ICFEDIT_region_RAM_end__ = 0x2000FFFF;
|
||||
/*-Sizes-*/
|
||||
define symbol __ICFEDIT_size_cstack__ = 0x400;
|
||||
define symbol __ICFEDIT_size_heap__ = 0x200;
|
||||
/**** End of ICF editor section. ###ICF###*/
|
||||
|
||||
|
||||
define memory mem with size = 4G;
|
||||
define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
|
||||
define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
|
||||
|
||||
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
|
||||
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
|
||||
|
||||
initialize by copy { readwrite };
|
||||
do not initialize { section .noinit };
|
||||
|
||||
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
|
||||
|
||||
place in ROM_region { readonly };
|
||||
place in RAM_region { readwrite,
|
||||
block CSTACK, block HEAP };
|
||||
@@ -1,393 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f100xb.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F100xB Value Line Devices vector table
|
||||
;* for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Configure the clock system
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD CEC_IRQHandler ; HDMI-CEC
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_IRQHandler
|
||||
B ADC1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_TIM15_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
B TIM1_BRK_TIM15_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_TIM16_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
B TIM1_UP_TIM16_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
B TIM1_TRG_COM_TIM17_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK CEC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CEC_IRQHandler
|
||||
B CEC_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_DAC_IRQHandler
|
||||
B TIM6_DAC_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
END
|
||||
@@ -1,459 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f100xe.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F100xE Value Line Devices vector table
|
||||
;* for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_TIM15_IRQHandler ; TIM1 Break and TIM15
|
||||
DCD TIM1_UP_TIM16_IRQHandler ; TIM1 Update and TIM16
|
||||
DCD TIM1_TRG_COM_TIM17_IRQHandler ; TIM1 Trigger and Commutation and TIM17
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD CEC_IRQHandler ; HDMI CEC
|
||||
DCD TIM12_IRQHandler ; TIM12
|
||||
DCD TIM13_IRQHandler ; TIM13
|
||||
DCD TIM14_IRQHandler ; TIM14
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_DAC_IRQHandler ; TIM6 and DAC underrun
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 if MISC_REMAP is not set
|
||||
; or DMA2 Channel4 if MISC_REMAP is set
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5 if MISC_REMAP is set
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_IRQHandler
|
||||
B ADC1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_TIM15_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_TIM15_IRQHandler
|
||||
B TIM1_BRK_TIM15_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_TIM16_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_TIM16_IRQHandler
|
||||
B TIM1_UP_TIM16_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_TIM17_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_TIM17_IRQHandler
|
||||
B TIM1_TRG_COM_TIM17_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK CEC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CEC_IRQHandler
|
||||
B CEC_IRQHandler
|
||||
|
||||
PUBWEAK TIM12_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM12_IRQHandler
|
||||
B TIM12_IRQHandler
|
||||
|
||||
PUBWEAK TIM13_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM13_IRQHandler
|
||||
B TIM13_IRQHandler
|
||||
|
||||
PUBWEAK TIM14_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM14_IRQHandler
|
||||
B TIM14_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_DAC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_DAC_IRQHandler
|
||||
B TIM6_DAC_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel1_IRQHandler
|
||||
B DMA2_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel2_IRQHandler
|
||||
B DMA2_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel3_IRQHandler
|
||||
B DMA2_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel4_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
B DMA2_Channel4_5_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel5_IRQHandler
|
||||
B DMA2_Channel5_IRQHandler
|
||||
|
||||
END
|
||||
@@ -1,320 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f101x6.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F101x6 Access Line Devices vector table for EWARM
|
||||
;* toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Configure the clock system
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD 0 ; Reserved
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD 0 ; Reserved
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_IRQHandler
|
||||
B ADC1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
END
|
||||
@@ -1,345 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f101xb.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F101xB Access Line Devices vector table for
|
||||
;* EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Configure the clock system
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD 0 ; Reserved
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_IRQHandler
|
||||
B ADC1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
END
|
||||
@@ -1,425 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f101xe.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F101xE Access Line Devices vector table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Configure the system clock
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_IRQHandler
|
||||
B ADC1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK FSMC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FSMC_IRQHandler
|
||||
B FSMC_IRQHandler
|
||||
|
||||
PUBWEAK SDIO_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SDIO_IRQHandler
|
||||
B SDIO_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_IRQHandler
|
||||
B TIM6_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel1_IRQHandler
|
||||
B DMA2_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel2_IRQHandler
|
||||
B DMA2_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel3_IRQHandler
|
||||
B DMA2_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel4_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
B DMA2_Channel4_5_IRQHandler
|
||||
|
||||
|
||||
END
|
||||
|
||||
@@ -1,456 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f101xg.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F101xG Access Line Devices vector table for EWARM
|
||||
;* toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Configure the system clock
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM9_IRQHandler ; TIM9
|
||||
DCD TIM10_IRQHandler ; TIM10
|
||||
DCD TIM11_IRQHandler ; TIM11
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM12_IRQHandler ; TIM12
|
||||
DCD TIM13_IRQHandler ; TIM13
|
||||
DCD TIM14_IRQHandler ; TIM14
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_IRQHandler
|
||||
B ADC1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM9_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM9_IRQHandler
|
||||
B TIM9_IRQHandler
|
||||
|
||||
PUBWEAK TIM10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM10_IRQHandler
|
||||
B TIM10_IRQHandler
|
||||
|
||||
PUBWEAK TIM11_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM11_IRQHandler
|
||||
B TIM11_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK FSMC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FSMC_IRQHandler
|
||||
B FSMC_IRQHandler
|
||||
|
||||
PUBWEAK TIM12_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM12_IRQHandler
|
||||
B TIM12_IRQHandler
|
||||
|
||||
PUBWEAK TIM13_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM13_IRQHandler
|
||||
B TIM13_IRQHandler
|
||||
|
||||
PUBWEAK TIM14_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM14_IRQHandler
|
||||
B TIM14_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_IRQHandler
|
||||
B TIM6_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel1_IRQHandler
|
||||
B DMA2_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel2_IRQHandler
|
||||
B DMA2_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel3_IRQHandler
|
||||
B DMA2_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel4_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
B DMA2_Channel4_5_IRQHandler
|
||||
|
||||
|
||||
END
|
||||
|
||||
@@ -1,335 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f102x6.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F102x6 USB Line Devices vector table for EWARM
|
||||
;* toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Configure the clock system
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD USB_HP_IRQHandler ; USB High Priority
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD 0 ; Reserved
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_IRQHandler
|
||||
B ADC1_IRQHandler
|
||||
|
||||
PUBWEAK USB_HP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_HP_IRQHandler
|
||||
B USB_HP_IRQHandler
|
||||
|
||||
PUBWEAK USB_LP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_LP_IRQHandler
|
||||
B USB_LP_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK USBWakeUp_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USBWakeUp_IRQHandler
|
||||
B USBWakeUp_IRQHandler
|
||||
|
||||
END
|
||||
@@ -1,360 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f102xb.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F102xB USB Line Devices vector table for
|
||||
;* EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Configure the clock system
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_IRQHandler ; ADC1
|
||||
DCD USB_HP_IRQHandler ; USB High Priority
|
||||
DCD USB_LP_IRQHandler ; USB Low Priority
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_IRQHandler
|
||||
B ADC1_IRQHandler
|
||||
|
||||
PUBWEAK USB_HP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_HP_IRQHandler
|
||||
B USB_HP_IRQHandler
|
||||
|
||||
PUBWEAK USB_LP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_LP_IRQHandler
|
||||
B USB_LP_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK USBWakeUp_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USBWakeUp_IRQHandler
|
||||
B USBWakeUp_IRQHandler
|
||||
|
||||
END
|
||||
@@ -1,365 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f103x6.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F103x6 Performance Line Devices vector table for EWARM
|
||||
;* toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Configure the clock system
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD 0 ; Reserved
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD 0 ; Reserved
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD 0 ; Reserved
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_2_IRQHandler
|
||||
B ADC1_2_IRQHandler
|
||||
|
||||
PUBWEAK USB_HP_CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
B USB_HP_CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
B USB_LP_CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_IRQHandler
|
||||
B TIM1_BRK_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_IRQHandler
|
||||
B TIM1_UP_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
B TIM1_TRG_COM_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK USBWakeUp_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USBWakeUp_IRQHandler
|
||||
B USBWakeUp_IRQHandler
|
||||
|
||||
END
|
||||
@@ -1,390 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f103xb.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F103xB Performance Line Devices vector table for
|
||||
;* EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Configure the clock system
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_2_IRQHandler
|
||||
B ADC1_2_IRQHandler
|
||||
|
||||
PUBWEAK USB_HP_CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
B USB_HP_CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
B USB_LP_CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_IRQHandler
|
||||
B TIM1_BRK_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_IRQHandler
|
||||
B TIM1_UP_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
B TIM1_TRG_COM_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK USBWakeUp_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USBWakeUp_IRQHandler
|
||||
B USBWakeUp_IRQHandler
|
||||
|
||||
END
|
||||
@@ -1,495 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f103xe.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F103xE Performance Line Devices vector table for EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* - Configure the system clock
|
||||
;* - Branches to main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
DCD TIM8_BRK_IRQHandler ; TIM8 Break
|
||||
DCD TIM8_UP_IRQHandler ; TIM8 Update
|
||||
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD ADC3_IRQHandler ; ADC3
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_2_IRQHandler
|
||||
B ADC1_2_IRQHandler
|
||||
|
||||
PUBWEAK USB_HP_CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
B USB_HP_CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
B USB_LP_CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_IRQHandler
|
||||
B TIM1_BRK_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_IRQHandler
|
||||
B TIM1_UP_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
B TIM1_TRG_COM_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK USBWakeUp_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USBWakeUp_IRQHandler
|
||||
B USBWakeUp_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_BRK_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_BRK_IRQHandler
|
||||
B TIM8_BRK_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_UP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_UP_IRQHandler
|
||||
B TIM8_UP_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_TRG_COM_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_TRG_COM_IRQHandler
|
||||
B TIM8_TRG_COM_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_CC_IRQHandler
|
||||
B TIM8_CC_IRQHandler
|
||||
|
||||
PUBWEAK ADC3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC3_IRQHandler
|
||||
B ADC3_IRQHandler
|
||||
|
||||
PUBWEAK FSMC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FSMC_IRQHandler
|
||||
B FSMC_IRQHandler
|
||||
|
||||
PUBWEAK SDIO_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SDIO_IRQHandler
|
||||
B SDIO_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_IRQHandler
|
||||
B TIM6_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel1_IRQHandler
|
||||
B DMA2_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel2_IRQHandler
|
||||
B DMA2_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel3_IRQHandler
|
||||
B DMA2_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel4_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
B DMA2_Channel4_5_IRQHandler
|
||||
|
||||
|
||||
END
|
||||
|
||||
@@ -1,492 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f103xg.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F103xG Performances Line Devices vector table for EWARM
|
||||
;* toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR address,
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9
|
||||
DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10
|
||||
DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12
|
||||
DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13
|
||||
DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD ADC3_IRQHandler ; ADC3
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_2_IRQHandler
|
||||
B ADC1_2_IRQHandler
|
||||
|
||||
PUBWEAK USB_HP_CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
B USB_HP_CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
B USB_LP_CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_TIM9_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_TIM9_IRQHandler
|
||||
B TIM1_BRK_TIM9_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_TIM10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_TIM10_IRQHandler
|
||||
B TIM1_UP_TIM10_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_TIM11_IRQHandler
|
||||
B TIM1_TRG_COM_TIM11_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK USBWakeUp_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USBWakeUp_IRQHandler
|
||||
B USBWakeUp_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_BRK_TIM12_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_BRK_TIM12_IRQHandler
|
||||
B TIM8_BRK_TIM12_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_UP_TIM13_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_UP_TIM13_IRQHandler
|
||||
B TIM8_UP_TIM13_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_TRG_COM_TIM14_IRQHandler
|
||||
B TIM8_TRG_COM_TIM14_IRQHandler
|
||||
|
||||
PUBWEAK TIM8_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM8_CC_IRQHandler
|
||||
B TIM8_CC_IRQHandler
|
||||
|
||||
PUBWEAK ADC3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC3_IRQHandler
|
||||
B ADC3_IRQHandler
|
||||
|
||||
PUBWEAK FSMC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FSMC_IRQHandler
|
||||
B FSMC_IRQHandler
|
||||
|
||||
PUBWEAK SDIO_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SDIO_IRQHandler
|
||||
B SDIO_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_IRQHandler
|
||||
B TIM6_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel1_IRQHandler
|
||||
B DMA2_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel2_IRQHandler
|
||||
B DMA2_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel3_IRQHandler
|
||||
B DMA2_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel4_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
B DMA2_Channel4_5_IRQHandler
|
||||
|
||||
|
||||
END
|
||||
|
||||
@@ -1,506 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
||||
;* File Name : startup_stm32f105xc.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F105xC Connectivity line devices vector table for
|
||||
;* EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Configure the clock system
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C1 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC alarm through EXTI line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_2_IRQHandler
|
||||
B ADC1_2_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_TX_IRQHandler
|
||||
B CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX0_IRQHandler
|
||||
B CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_IRQHandler
|
||||
B TIM1_BRK_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_IRQHandler
|
||||
B TIM1_UP_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
B TIM1_TRG_COM_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
B OTG_FS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_IRQHandler
|
||||
B TIM6_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel1_IRQHandler
|
||||
B DMA2_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel2_IRQHandler
|
||||
B DMA2_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel3_IRQHandler
|
||||
B DMA2_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel4_IRQHandler
|
||||
B DMA2_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel5_IRQHandler
|
||||
B DMA2_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK ETH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ETH_IRQHandler
|
||||
B ETH_IRQHandler
|
||||
|
||||
PUBWEAK ETH_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ETH_WKUP_IRQHandler
|
||||
B ETH_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_TX_IRQHandler
|
||||
B CAN2_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX0_IRQHandler
|
||||
B CAN2_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX1_IRQHandler
|
||||
B CAN2_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_SCE_IRQHandler
|
||||
B CAN2_SCE_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_IRQHandler
|
||||
B OTG_FS_IRQHandler
|
||||
|
||||
END
|
||||
@@ -1,506 +0,0 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics *******************
|
||||
;* File Name : startup_stm32f107xc.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F107xC Connectivity line devices vector table for
|
||||
;* EWARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Configure the clock system
|
||||
;* - Set the initial PC == __iar_program_start,
|
||||
;* - Set the vector table entries with the exceptions ISR
|
||||
;* address.
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;********************************************************************************
|
||||
;*
|
||||
;* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software is licensed under terms that can be found in the LICENSE file
|
||||
;* in the root directory of this software component.
|
||||
;* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
;
|
||||
;*******************************************************************************
|
||||
;
|
||||
;
|
||||
; The modules in this file are included in the libraries, and may be replaced
|
||||
; by any user-defined modules that define the PUBLIC symbol _program_start or
|
||||
; a user defined start symbol.
|
||||
; To override the cstartup defined in the library, simply add your modified
|
||||
; version to the workbench project.
|
||||
;
|
||||
; The vector table is normally located at address 0.
|
||||
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
|
||||
; The name "__vector_table" has special meaning for C-SPY:
|
||||
; it is where the SP start value is found, and the NVIC vector
|
||||
; table register (VTOR) is initialized to this address if != 0.
|
||||
;
|
||||
; Cortex-M version
|
||||
;
|
||||
|
||||
MODULE ?cstartup
|
||||
|
||||
;; Forward declaration of sections.
|
||||
SECTION CSTACK:DATA:NOROOT(3)
|
||||
|
||||
SECTION .intvec:CODE:NOROOT(2)
|
||||
|
||||
EXTERN __iar_program_start
|
||||
EXTERN SystemInit
|
||||
PUBLIC __vector_table
|
||||
|
||||
DATA
|
||||
__vector_table
|
||||
DCD sfe(CSTACK)
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 and ADC2
|
||||
DCD CAN1_TX_IRQHandler ; CAN1 TX
|
||||
DCD CAN1_RX0_IRQHandler ; CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C1 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC alarm through EXTI line
|
||||
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4
|
||||
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
|
||||
DCD ETH_IRQHandler ; Ethernet
|
||||
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
|
||||
DCD CAN2_TX_IRQHandler ; CAN2 TX
|
||||
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
|
||||
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
|
||||
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
|
||||
DCD OTG_FS_IRQHandler ; USB OTG FS
|
||||
|
||||
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
|
||||
;;
|
||||
;; Default interrupt handlers.
|
||||
;;
|
||||
THUMB
|
||||
|
||||
PUBWEAK Reset_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(2)
|
||||
Reset_Handler
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__iar_program_start
|
||||
BX R0
|
||||
|
||||
PUBWEAK NMI_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
NMI_Handler
|
||||
B NMI_Handler
|
||||
|
||||
PUBWEAK HardFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
HardFault_Handler
|
||||
B HardFault_Handler
|
||||
|
||||
PUBWEAK MemManage_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
MemManage_Handler
|
||||
B MemManage_Handler
|
||||
|
||||
PUBWEAK BusFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
BusFault_Handler
|
||||
B BusFault_Handler
|
||||
|
||||
PUBWEAK UsageFault_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UsageFault_Handler
|
||||
B UsageFault_Handler
|
||||
|
||||
PUBWEAK SVC_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SVC_Handler
|
||||
B SVC_Handler
|
||||
|
||||
PUBWEAK DebugMon_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DebugMon_Handler
|
||||
B DebugMon_Handler
|
||||
|
||||
PUBWEAK PendSV_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PendSV_Handler
|
||||
B PendSV_Handler
|
||||
|
||||
PUBWEAK SysTick_Handler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SysTick_Handler
|
||||
B SysTick_Handler
|
||||
|
||||
PUBWEAK WWDG_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
WWDG_IRQHandler
|
||||
B WWDG_IRQHandler
|
||||
|
||||
PUBWEAK PVD_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
PVD_IRQHandler
|
||||
B PVD_IRQHandler
|
||||
|
||||
PUBWEAK TAMPER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TAMPER_IRQHandler
|
||||
B TAMPER_IRQHandler
|
||||
|
||||
PUBWEAK RTC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_IRQHandler
|
||||
B RTC_IRQHandler
|
||||
|
||||
PUBWEAK FLASH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
FLASH_IRQHandler
|
||||
B FLASH_IRQHandler
|
||||
|
||||
PUBWEAK RCC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RCC_IRQHandler
|
||||
B RCC_IRQHandler
|
||||
|
||||
PUBWEAK EXTI0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI0_IRQHandler
|
||||
B EXTI0_IRQHandler
|
||||
|
||||
PUBWEAK EXTI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI1_IRQHandler
|
||||
B EXTI1_IRQHandler
|
||||
|
||||
PUBWEAK EXTI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI2_IRQHandler
|
||||
B EXTI2_IRQHandler
|
||||
|
||||
PUBWEAK EXTI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI3_IRQHandler
|
||||
B EXTI3_IRQHandler
|
||||
|
||||
|
||||
PUBWEAK EXTI4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI4_IRQHandler
|
||||
B EXTI4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel1_IRQHandler
|
||||
B DMA1_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel2_IRQHandler
|
||||
B DMA1_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel3_IRQHandler
|
||||
B DMA1_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel4_IRQHandler
|
||||
B DMA1_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel5_IRQHandler
|
||||
B DMA1_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel6_IRQHandler
|
||||
B DMA1_Channel6_IRQHandler
|
||||
|
||||
PUBWEAK DMA1_Channel7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA1_Channel7_IRQHandler
|
||||
B DMA1_Channel7_IRQHandler
|
||||
|
||||
PUBWEAK ADC1_2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ADC1_2_IRQHandler
|
||||
B ADC1_2_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_TX_IRQHandler
|
||||
B CAN1_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX0_IRQHandler
|
||||
B CAN1_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_RX1_IRQHandler
|
||||
B CAN1_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN1_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN1_SCE_IRQHandler
|
||||
B CAN1_SCE_IRQHandler
|
||||
|
||||
PUBWEAK EXTI9_5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI9_5_IRQHandler
|
||||
B EXTI9_5_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_BRK_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_BRK_IRQHandler
|
||||
B TIM1_BRK_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_UP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_UP_IRQHandler
|
||||
B TIM1_UP_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_TRG_COM_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
B TIM1_TRG_COM_IRQHandler
|
||||
|
||||
PUBWEAK TIM1_CC_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM1_CC_IRQHandler
|
||||
B TIM1_CC_IRQHandler
|
||||
|
||||
PUBWEAK TIM2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM2_IRQHandler
|
||||
B TIM2_IRQHandler
|
||||
|
||||
PUBWEAK TIM3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM3_IRQHandler
|
||||
B TIM3_IRQHandler
|
||||
|
||||
PUBWEAK TIM4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM4_IRQHandler
|
||||
B TIM4_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_EV_IRQHandler
|
||||
B I2C1_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C1_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C1_ER_IRQHandler
|
||||
B I2C1_ER_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_EV_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_EV_IRQHandler
|
||||
B I2C2_EV_IRQHandler
|
||||
|
||||
PUBWEAK I2C2_ER_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
I2C2_ER_IRQHandler
|
||||
B I2C2_ER_IRQHandler
|
||||
|
||||
PUBWEAK SPI1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI1_IRQHandler
|
||||
B SPI1_IRQHandler
|
||||
|
||||
PUBWEAK SPI2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI2_IRQHandler
|
||||
B SPI2_IRQHandler
|
||||
|
||||
PUBWEAK USART1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART1_IRQHandler
|
||||
B USART1_IRQHandler
|
||||
|
||||
PUBWEAK USART2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART2_IRQHandler
|
||||
B USART2_IRQHandler
|
||||
|
||||
PUBWEAK USART3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
USART3_IRQHandler
|
||||
B USART3_IRQHandler
|
||||
|
||||
PUBWEAK EXTI15_10_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
EXTI15_10_IRQHandler
|
||||
B EXTI15_10_IRQHandler
|
||||
|
||||
PUBWEAK RTC_Alarm_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
RTC_Alarm_IRQHandler
|
||||
B RTC_Alarm_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_WKUP_IRQHandler
|
||||
B OTG_FS_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK TIM5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM5_IRQHandler
|
||||
B TIM5_IRQHandler
|
||||
|
||||
PUBWEAK SPI3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
SPI3_IRQHandler
|
||||
B SPI3_IRQHandler
|
||||
|
||||
PUBWEAK UART4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART4_IRQHandler
|
||||
B UART4_IRQHandler
|
||||
|
||||
PUBWEAK UART5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
UART5_IRQHandler
|
||||
B UART5_IRQHandler
|
||||
|
||||
PUBWEAK TIM6_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM6_IRQHandler
|
||||
B TIM6_IRQHandler
|
||||
|
||||
PUBWEAK TIM7_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
TIM7_IRQHandler
|
||||
B TIM7_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel1_IRQHandler
|
||||
B DMA2_Channel1_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel2_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel2_IRQHandler
|
||||
B DMA2_Channel2_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel3_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel3_IRQHandler
|
||||
B DMA2_Channel3_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel4_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel4_IRQHandler
|
||||
B DMA2_Channel4_IRQHandler
|
||||
|
||||
PUBWEAK DMA2_Channel5_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
DMA2_Channel5_IRQHandler
|
||||
B DMA2_Channel5_IRQHandler
|
||||
|
||||
PUBWEAK ETH_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ETH_IRQHandler
|
||||
B ETH_IRQHandler
|
||||
|
||||
PUBWEAK ETH_WKUP_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
ETH_WKUP_IRQHandler
|
||||
B ETH_WKUP_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_TX_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_TX_IRQHandler
|
||||
B CAN2_TX_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX0_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX0_IRQHandler
|
||||
B CAN2_RX0_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_RX1_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_RX1_IRQHandler
|
||||
B CAN2_RX1_IRQHandler
|
||||
|
||||
PUBWEAK CAN2_SCE_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
CAN2_SCE_IRQHandler
|
||||
B CAN2_SCE_IRQHandler
|
||||
|
||||
PUBWEAK OTG_FS_IRQHandler
|
||||
SECTION .text:CODE:REORDER:NOROOT(1)
|
||||
OTG_FS_IRQHandler
|
||||
B OTG_FS_IRQHandler
|
||||
|
||||
END
|
||||
@@ -1,406 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f1xx.c
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
|
||||
*
|
||||
* 1. This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
|
||||
* factors, AHB/APBx prescalers and Flash settings).
|
||||
* This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f1xx_xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
* 2. After each device reset the HSI (8 MHz) is used as system clock source.
|
||||
* Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
|
||||
* configure the system clock before to branch to main program.
|
||||
*
|
||||
* 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
|
||||
* the product used), refer to "HSE_VALUE".
|
||||
* When HSE is used as system clock source, directly or through PLL, and you
|
||||
* are using different crystal you have to adapt the HSE value to your own
|
||||
* configuration.
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f1xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "stm32f1xx.h"
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Default value of the External oscillator in Hz.
|
||||
This value can be provided and adapted by the user application. */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 8000000U /*!< Default value of the Internal oscillator in Hz.
|
||||
This value can be provided and adapted by the user application. */
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/*!< Uncomment the following line if you need to use external SRAM */
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||
|
||||
/* Note: Following vector table addresses must be defined in line with linker
|
||||
configuration. */
|
||||
/*!< Uncomment the following line if you need to relocate the vector table
|
||||
anywhere in Flash or Sram, else the vector table is kept at the automatic
|
||||
remap of boot address selected */
|
||||
/* #define USER_VECT_TAB_ADDRESS */
|
||||
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table
|
||||
in Sram else user remap will be done in Flash. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#if defined(VECT_TAB_SRAM)
|
||||
#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#else
|
||||
#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#endif /* VECT_TAB_SRAM */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 8000000;
|
||||
const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
const uint8_t APBPrescTable[8U] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the Embedded Flash Interface, the PLL and update the
|
||||
* SystemCoreClock variable.
|
||||
* @note This function should be used only after reset.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit (void)
|
||||
{
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif
|
||||
|
||||
/* Configure the Vector Table location -------------------------------------*/
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
|
||||
* 8 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
|
||||
* 8 MHz or 25 MHz, depending on the product used), user has to ensure
|
||||
* that HSE_VALUE is same as the real frequency of the crystal used.
|
||||
* Otherwise, this function may have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate (void)
|
||||
{
|
||||
uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
|
||||
|
||||
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||||
uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
|
||||
#endif /* STM32F105xC */
|
||||
|
||||
#if defined(STM32F100xB) || defined(STM32F100xE)
|
||||
uint32_t prediv1factor = 0U;
|
||||
#endif /* STM32F100xB or STM32F100xE */
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00U: /* HSI used as system clock */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04U: /* HSE used as system clock */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08U: /* PLL used as system clock */
|
||||
|
||||
/* Get PLL clock source and multiplication factor ----------------------*/
|
||||
pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
|
||||
pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
|
||||
|
||||
#if !defined(STM32F105xC) && !defined(STM32F107xC)
|
||||
pllmull = ( pllmull >> 18U) + 2U;
|
||||
|
||||
if (pllsource == 0x00U)
|
||||
{
|
||||
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
|
||||
SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
|
||||
}
|
||||
else
|
||||
{
|
||||
#if defined(STM32F100xB) || defined(STM32F100xE)
|
||||
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
|
||||
/* HSE oscillator clock selected as PREDIV1 clock entry */
|
||||
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
|
||||
#else
|
||||
/* HSE selected as PLL clock entry */
|
||||
if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
|
||||
{/* HSE oscillator clock divided by 2 */
|
||||
SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
|
||||
}
|
||||
else
|
||||
{
|
||||
SystemCoreClock = HSE_VALUE * pllmull;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
#else
|
||||
pllmull = pllmull >> 18U;
|
||||
|
||||
if (pllmull != 0x0DU)
|
||||
{
|
||||
pllmull += 2U;
|
||||
}
|
||||
else
|
||||
{ /* PLL multiplication factor = PLL input clock * 6.5 */
|
||||
pllmull = 13U / 2U;
|
||||
}
|
||||
|
||||
if (pllsource == 0x00U)
|
||||
{
|
||||
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
|
||||
SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
|
||||
}
|
||||
else
|
||||
{/* PREDIV1 selected as PLL clock entry */
|
||||
|
||||
/* Get PREDIV1 clock source and division factor */
|
||||
prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
|
||||
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
|
||||
|
||||
if (prediv1source == 0U)
|
||||
{
|
||||
/* HSE oscillator clock selected as PREDIV1 clock entry */
|
||||
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
|
||||
}
|
||||
else
|
||||
{/* PLL2 clock selected as PREDIV1 clock entry */
|
||||
|
||||
/* Get PREDIV2 division factor and PLL2 multiplication factor */
|
||||
prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
|
||||
pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U;
|
||||
SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
|
||||
}
|
||||
}
|
||||
#endif /* STM32F105xC */
|
||||
break;
|
||||
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
|
||||
/* Compute HCLK clock frequency ----------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
|
||||
/* HCLK clock frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
/**
|
||||
* @brief Setup the external memory controller. Called in startup_stm32f1xx.s
|
||||
* before jump to __main
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f1xx_xx.s/.c before jump to main.
|
||||
* This function configures the external SRAM mounted on STM3210E-EVAL
|
||||
* board (STM32 High density devices). This SRAM will be used as program
|
||||
* data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmpreg;
|
||||
/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
|
||||
required, then adjust the Register Addresses */
|
||||
|
||||
/* Enable FSMC clock */
|
||||
RCC->AHBENR = 0x00000114U;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
|
||||
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
|
||||
RCC->APB2ENR = 0x000001E0U;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
|
||||
|
||||
(void)(tmpreg);
|
||||
|
||||
/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
|
||||
/*---------------- SRAM Address lines configuration -------------------------*/
|
||||
/*---------------- NOE and NWE configuration --------------------------------*/
|
||||
/*---------------- NE3 configuration ----------------------------------------*/
|
||||
/*---------------- NBL0, NBL1 configuration ---------------------------------*/
|
||||
|
||||
GPIOD->CRL = 0x44BB44BBU;
|
||||
GPIOD->CRH = 0xBBBBBBBBU;
|
||||
|
||||
GPIOE->CRL = 0xB44444BBU;
|
||||
GPIOE->CRH = 0xBBBBBBBBU;
|
||||
|
||||
GPIOF->CRL = 0x44BBBBBBU;
|
||||
GPIOF->CRH = 0xBBBB4444U;
|
||||
|
||||
GPIOG->CRL = 0x44BBBBBBU;
|
||||
GPIOG->CRH = 0x444B4B44U;
|
||||
|
||||
/*---------------- FSMC Configuration ---------------------------------------*/
|
||||
/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/
|
||||
|
||||
FSMC_Bank1->BTCR[4U] = 0x00001091U;
|
||||
FSMC_Bank1->BTCR[5U] = 0x00110212U;
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
@@ -87,6 +87,7 @@ static err_t low_level_output(struct netif *netif, struct pbuf *p)
|
||||
{
|
||||
struct pbuf *q;
|
||||
uint32_t primask;
|
||||
uint32_t start_tick;
|
||||
|
||||
LWIP_UNUSED_ARG(netif);
|
||||
primask = ethernetif_lock();
|
||||
@@ -95,11 +96,20 @@ static err_t low_level_output(struct netif *netif, struct pbuf *p)
|
||||
pbuf_remove_header(p, ETH_PAD_SIZE);
|
||||
#endif
|
||||
|
||||
for (q = p; q != NULL; q = q->next) {
|
||||
ch390_write_mem(q->payload, q->len);
|
||||
start_tick = HAL_GetTick();
|
||||
while (ch390_read_reg(CH390_TCR) & TCR_TXREQ) {
|
||||
if ((HAL_GetTick() - start_tick) > 10u) {
|
||||
ethernetif_unlock(primask);
|
||||
#if ETH_PAD_SIZE
|
||||
pbuf_add_header(p, ETH_PAD_SIZE);
|
||||
#endif
|
||||
LINK_STATS_INC(link.drop);
|
||||
return ERR_TIMEOUT;
|
||||
}
|
||||
}
|
||||
|
||||
while (ch390_read_reg(CH390_TCR) & TCR_TXREQ) {
|
||||
for (q = p; q != NULL; q = q->next) {
|
||||
ch390_write_mem(q->payload, q->len);
|
||||
}
|
||||
|
||||
ch390_write_reg(CH390_TXPLL, p->tot_len & 0xFFu);
|
||||
|
||||
@@ -1,125 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_hal_can_ex_legacy.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CAN HAL Extension module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F1xx_HAL_CAN_EX_LEGACY_H
|
||||
#define __STM32F1xx_HAL_CAN_EX_LEGACY_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \
|
||||
defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f1xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F1xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CANEx CANEx
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/**
|
||||
* @brief CAN filter configuration structure definition
|
||||
*/
|
||||
/* CAN filter banks differences over STM32F1 devices: */
|
||||
/* - STM32F1 Connectivity line: 28 filter banks shared between CAN1 and CAN2 */
|
||||
/* - Other STM32F10x devices: 14 filter banks */
|
||||
|
||||
typedef struct
|
||||
{
|
||||
uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
|
||||
configuration, first one for a 16-bit configuration).
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
|
||||
|
||||
uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
|
||||
configuration, second one for a 16-bit configuration).
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
|
||||
|
||||
uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
|
||||
according to the mode (MSBs for a 32-bit configuration,
|
||||
first one for a 16-bit configuration).
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
|
||||
|
||||
uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
|
||||
according to the mode (LSBs for a 32-bit configuration,
|
||||
second one for a 16-bit configuration).
|
||||
This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
|
||||
|
||||
uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
|
||||
This parameter can be a value of @ref CAN_filter_FIFO */
|
||||
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||||
uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
|
||||
#else
|
||||
uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 13. */
|
||||
#endif /* STM32F105xC || STM32F107xC */
|
||||
uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
|
||||
This parameter can be a value of @ref CAN_filter_mode */
|
||||
|
||||
uint32_t FilterScale; /*!< Specifies the filter scale.
|
||||
This parameter can be a value of @ref CAN_filter_scale */
|
||||
|
||||
uint32_t FilterActivation; /*!< Enable or disable the filter.
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
|
||||
uint32_t BankNumber; /*!< Select the start slave bank filter
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 28. */
|
||||
|
||||
}CAN_FilterConfTypeDef;
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup CANEx_Private_Macros CAN Extended Private Macros
|
||||
* @{
|
||||
*/
|
||||
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||||
#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27U)
|
||||
#else
|
||||
#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13U)
|
||||
#endif /* STM32F105xC || STM32F107xC */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* STM32F103x6) || STM32F103xB || STM32F103xE || STM32F103xG) || STM32F105xC || STM32F107xC */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F1xx_HAL_CAN_EX_LEGACY_H */
|
||||
@@ -1,776 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx_hal_can_legacy.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of CAN HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F1xx_HAL_CAN_LEGACY_H
|
||||
#define __STM32F1xx_HAL_CAN_LEGACY_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \
|
||||
defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f1xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F1xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/** @defgroup CAN_Exported_Types CAN Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief HAL State structures definition
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_CAN_STATE_RESET = 0x00U, /*!< CAN not yet initialized or disabled */
|
||||
HAL_CAN_STATE_READY = 0x01U, /*!< CAN initialized and ready for use */
|
||||
HAL_CAN_STATE_BUSY = 0x02U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_TX = 0x12U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_RX0 = 0x22U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_RX1 = 0x32U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_TX_RX0 = 0x42U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_TX_RX1 = 0x52U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_RX0_RX1 = 0x62U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_BUSY_TX_RX0_RX1 = 0x72U, /*!< CAN process is ongoing */
|
||||
HAL_CAN_STATE_TIMEOUT = 0x03U, /*!< CAN in Timeout state */
|
||||
HAL_CAN_STATE_ERROR = 0x04U /*!< CAN error state */
|
||||
|
||||
}HAL_CAN_StateTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Prescaler; /*!< Specifies the length of a time quantum.
|
||||
This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the CAN operating mode.
|
||||
This parameter can be a value of @ref CAN_operating_mode */
|
||||
|
||||
uint32_t SJW; /*!< Specifies the maximum number of time quanta
|
||||
the CAN hardware is allowed to lengthen or
|
||||
shorten a bit to perform resynchronization.
|
||||
This parameter can be a value of @ref CAN_synchronisation_jump_width */
|
||||
|
||||
uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
|
||||
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
|
||||
|
||||
uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
|
||||
This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
|
||||
|
||||
uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
|
||||
This parameter can be set to ENABLE or DISABLE. */
|
||||
|
||||
uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
|
||||
uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
|
||||
uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
|
||||
uint32_t RFLM; /*!< Enable or disable the receive FIFO Locked mode.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
|
||||
uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
|
||||
This parameter can be set to ENABLE or DISABLE */
|
||||
}CAN_InitTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN Tx message structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t StdId; /*!< Specifies the standard identifier.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
|
||||
|
||||
uint32_t ExtId; /*!< Specifies the extended identifier.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
|
||||
|
||||
uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
|
||||
This parameter can be a value of @ref CAN_Identifier_Type */
|
||||
|
||||
uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
|
||||
This parameter can be a value of @ref CAN_remote_transmission_request */
|
||||
|
||||
uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
|
||||
|
||||
uint8_t Data[8]; /*!< Contains the data to be transmitted.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
|
||||
|
||||
}CanTxMsgTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN Rx message structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t StdId; /*!< Specifies the standard identifier.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
|
||||
|
||||
uint32_t ExtId; /*!< Specifies the extended identifier.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
|
||||
|
||||
uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
|
||||
This parameter can be a value of @ref CAN_Identifier_Type */
|
||||
|
||||
uint32_t RTR; /*!< Specifies the type of frame for the received message.
|
||||
This parameter can be a value of @ref CAN_remote_transmission_request */
|
||||
|
||||
uint32_t DLC; /*!< Specifies the length of the frame that will be received.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
|
||||
|
||||
uint8_t Data[8]; /*!< Contains the data to be received.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
|
||||
|
||||
uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
|
||||
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
|
||||
|
||||
uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
|
||||
This parameter can be CAN_FIFO0 or CAN_FIFO1 */
|
||||
|
||||
}CanRxMsgTypeDef;
|
||||
|
||||
/**
|
||||
* @brief CAN handle Structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
CAN_TypeDef *Instance; /*!< Register base address */
|
||||
|
||||
CAN_InitTypeDef Init; /*!< CAN required parameters */
|
||||
|
||||
CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
|
||||
|
||||
CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure for RX FIFO0 msg */
|
||||
|
||||
CanRxMsgTypeDef* pRx1Msg; /*!< Pointer to reception structure for RX FIFO1 msg */
|
||||
|
||||
__IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
|
||||
|
||||
HAL_LockTypeDef Lock; /*!< CAN locking object */
|
||||
|
||||
__IO uint32_t ErrorCode; /*!< CAN Error code */
|
||||
|
||||
}CAN_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup CAN_Exported_Constants CAN Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_Error_Code CAN Error Code
|
||||
* @{
|
||||
*/
|
||||
#define HAL_CAN_ERROR_NONE 0x00000000U /*!< No error */
|
||||
#define HAL_CAN_ERROR_EWG 0x00000001U /*!< EWG error */
|
||||
#define HAL_CAN_ERROR_EPV 0x00000002U /*!< EPV error */
|
||||
#define HAL_CAN_ERROR_BOF 0x00000004U /*!< BOF error */
|
||||
#define HAL_CAN_ERROR_STF 0x00000008U /*!< Stuff error */
|
||||
#define HAL_CAN_ERROR_FOR 0x00000010U /*!< Form error */
|
||||
#define HAL_CAN_ERROR_ACK 0x00000020U /*!< Acknowledgment error */
|
||||
#define HAL_CAN_ERROR_BR 0x00000040U /*!< Bit recessive */
|
||||
#define HAL_CAN_ERROR_BD 0x00000080U /*!< LEC dominant */
|
||||
#define HAL_CAN_ERROR_CRC 0x00000100U /*!< LEC transfer error */
|
||||
#define HAL_CAN_ERROR_FOV0 0x00000200U /*!< FIFO0 overrun error */
|
||||
#define HAL_CAN_ERROR_FOV1 0x00000400U /*!< FIFO1 overrun error */
|
||||
#define HAL_CAN_ERROR_TXFAIL 0x00000800U /*!< Transmit failure */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_InitStatus CAN initialization Status
|
||||
* @{
|
||||
*/
|
||||
#define CAN_INITSTATUS_FAILED 0x00000000U /*!< CAN initialization failed */
|
||||
#define CAN_INITSTATUS_SUCCESS 0x00000001U /*!< CAN initialization OK */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_operating_mode CAN Operating Mode
|
||||
* @{
|
||||
*/
|
||||
#define CAN_MODE_NORMAL 0x00000000U /*!< Normal mode */
|
||||
#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
|
||||
#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
|
||||
#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width
|
||||
* @{
|
||||
*/
|
||||
#define CAN_SJW_1TQ 0x00000000U /*!< 1 time quantum */
|
||||
#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
|
||||
#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
|
||||
#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1
|
||||
* @{
|
||||
*/
|
||||
#define CAN_BS1_1TQ 0x00000000U /*!< 1 time quantum */
|
||||
#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
|
||||
#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
|
||||
#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
|
||||
#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
|
||||
#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
|
||||
#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
|
||||
#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
|
||||
#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
|
||||
#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
|
||||
#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
|
||||
#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
|
||||
#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
|
||||
#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
|
||||
#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
|
||||
#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in bit segment 2
|
||||
* @{
|
||||
*/
|
||||
#define CAN_BS2_1TQ 0x00000000U /*!< 1 time quantum */
|
||||
#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
|
||||
#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
|
||||
#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
|
||||
#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
|
||||
#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
|
||||
#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
|
||||
#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_filter_mode CAN Filter Mode
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */
|
||||
#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_filter_scale CAN Filter Scale
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */
|
||||
#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_filter_FIFO CAN Filter FIFO
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
|
||||
#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_Identifier_Type CAN Identifier Type
|
||||
* @{
|
||||
*/
|
||||
#define CAN_ID_STD 0x00000000U /*!< Standard Id */
|
||||
#define CAN_ID_EXT 0x00000004U /*!< Extended Id */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
|
||||
* @{
|
||||
*/
|
||||
#define CAN_RTR_DATA 0x00000000U /*!< Data frame */
|
||||
#define CAN_RTR_REMOTE 0x00000002U /*!< Remote frame */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_transmit_constants CAN Transmit Constants
|
||||
* @{
|
||||
*/
|
||||
#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number
|
||||
* @{
|
||||
*/
|
||||
#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
|
||||
#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_flags CAN Flags
|
||||
* @{
|
||||
*/
|
||||
/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
|
||||
and CAN_ClearFlag() functions. */
|
||||
/* If the flag is 0x1XXXXXXX, it means that it can only be used with
|
||||
CAN_GetFlagStatus() function. */
|
||||
|
||||
/* Transmit Flags */
|
||||
#define CAN_FLAG_RQCP0 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP0_BIT_POSITION)) /*!< Request MailBox0 flag */
|
||||
#define CAN_FLAG_RQCP1 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP1_BIT_POSITION)) /*!< Request MailBox1 flag */
|
||||
#define CAN_FLAG_RQCP2 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_RQCP2_BIT_POSITION)) /*!< Request MailBox2 flag */
|
||||
#define CAN_FLAG_TXOK0 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK0_BIT_POSITION)) /*!< Transmission OK MailBox0 flag */
|
||||
#define CAN_FLAG_TXOK1 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK1_BIT_POSITION)) /*!< Transmission OK MailBox1 flag */
|
||||
#define CAN_FLAG_TXOK2 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TXOK2_BIT_POSITION)) /*!< Transmission OK MailBox2 flag */
|
||||
#define CAN_FLAG_TME0 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME0_BIT_POSITION)) /*!< Transmit mailbox 0 empty flag */
|
||||
#define CAN_FLAG_TME1 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME1_BIT_POSITION)) /*!< Transmit mailbox 0 empty flag */
|
||||
#define CAN_FLAG_TME2 ((uint32_t)((TSR_REGISTER_INDEX << 8U) | CAN_TSR_TME2_BIT_POSITION)) /*!< Transmit mailbox 0 empty flag */
|
||||
|
||||
/* Receive Flags */
|
||||
#define CAN_FLAG_FF0 ((uint32_t)((RF0R_REGISTER_INDEX << 8U) | CAN_RF0R_FF0_BIT_POSITION)) /*!< FIFO 0 Full flag */
|
||||
#define CAN_FLAG_FOV0 ((uint32_t)((RF0R_REGISTER_INDEX << 8U) | CAN_RF0R_FOV0_BIT_POSITION)) /*!< FIFO 0 Overrun flag */
|
||||
|
||||
#define CAN_FLAG_FF1 ((uint32_t)((RF1R_REGISTER_INDEX << 8U) | CAN_RF1R_FF1_BIT_POSITION)) /*!< FIFO 1 Full flag */
|
||||
#define CAN_FLAG_FOV1 ((uint32_t)((RF1R_REGISTER_INDEX << 8U) | CAN_RF1R_FOV1_BIT_POSITION)) /*!< FIFO 1 Overrun flag */
|
||||
|
||||
/* Operating Mode Flags */
|
||||
#define CAN_FLAG_WKU ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_WKU_BIT_POSITION)) /*!< Wake up flag */
|
||||
#define CAN_FLAG_SLAK ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_SLAK_BIT_POSITION)) /*!< Sleep acknowledge flag */
|
||||
#define CAN_FLAG_SLAKI ((uint32_t)((MSR_REGISTER_INDEX << 8U) | CAN_MSR_SLAKI_BIT_POSITION)) /*!< Sleep acknowledge flag */
|
||||
|
||||
/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
|
||||
In this case the SLAK bit can be polled.*/
|
||||
|
||||
/* Error Flags */
|
||||
#define CAN_FLAG_EWG ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_EWG_BIT_POSITION)) /*!< Error warning flag */
|
||||
#define CAN_FLAG_EPV ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_EPV_BIT_POSITION)) /*!< Error passive flag */
|
||||
#define CAN_FLAG_BOF ((uint32_t)((ESR_REGISTER_INDEX << 8U) | CAN_ESR_BOF_BIT_POSITION)) /*!< Bus-Off flag */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_Interrupts CAN Interrupts
|
||||
* @{
|
||||
*/
|
||||
#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
|
||||
|
||||
/* Receive Interrupts */
|
||||
#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
|
||||
#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
|
||||
#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
|
||||
#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
|
||||
#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
|
||||
#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
|
||||
|
||||
/* Operating Mode Interrupts */
|
||||
#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
|
||||
#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
|
||||
|
||||
/* Error Interrupts */
|
||||
#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
|
||||
#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
|
||||
#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
|
||||
#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
|
||||
#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup CAN_Private_Constants CAN Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* CAN intermediate shift values used for CAN flags */
|
||||
#define TSR_REGISTER_INDEX 0x5U
|
||||
#define RF0R_REGISTER_INDEX 0x2U
|
||||
#define RF1R_REGISTER_INDEX 0x4U
|
||||
#define MSR_REGISTER_INDEX 0x1U
|
||||
#define ESR_REGISTER_INDEX 0x3U
|
||||
|
||||
/* CAN flags bits position into their respective register (TSR, RF0R, RF1R or MSR registers) */
|
||||
/* Transmit Flags */
|
||||
#define CAN_TSR_RQCP0_BIT_POSITION 0x00000000U
|
||||
#define CAN_TSR_RQCP1_BIT_POSITION 0x00000008U
|
||||
#define CAN_TSR_RQCP2_BIT_POSITION 0x00000010U
|
||||
#define CAN_TSR_TXOK0_BIT_POSITION 0x00000001U
|
||||
#define CAN_TSR_TXOK1_BIT_POSITION 0x00000009U
|
||||
#define CAN_TSR_TXOK2_BIT_POSITION 0x00000011U
|
||||
#define CAN_TSR_TME0_BIT_POSITION 0x0000001AU
|
||||
#define CAN_TSR_TME1_BIT_POSITION 0x0000001BU
|
||||
#define CAN_TSR_TME2_BIT_POSITION 0x0000001CU
|
||||
|
||||
/* Receive Flags */
|
||||
#define CAN_RF0R_FF0_BIT_POSITION 0x00000003U
|
||||
#define CAN_RF0R_FOV0_BIT_POSITION 0x00000004U
|
||||
|
||||
#define CAN_RF1R_FF1_BIT_POSITION 0x00000003U
|
||||
#define CAN_RF1R_FOV1_BIT_POSITION 0x00000004U
|
||||
|
||||
/* Operating Mode Flags */
|
||||
#define CAN_MSR_WKU_BIT_POSITION 0x00000003U
|
||||
#define CAN_MSR_SLAK_BIT_POSITION 0x00000001U
|
||||
#define CAN_MSR_SLAKI_BIT_POSITION 0x00000004U
|
||||
|
||||
/* Error Flags */
|
||||
#define CAN_ESR_EWG_BIT_POSITION 0x00000000U
|
||||
#define CAN_ESR_EPV_BIT_POSITION 0x00000001U
|
||||
#define CAN_ESR_BOF_BIT_POSITION 0x00000002U
|
||||
|
||||
/* Mask used by macro to get/clear CAN flags*/
|
||||
#define CAN_FLAG_MASK 0x000000FFU
|
||||
|
||||
/* Mailboxes definition */
|
||||
#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
|
||||
#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
|
||||
#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macros -----------------------------------------------------------*/
|
||||
/** @defgroup CAN_Exported_Macros CAN Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Reset CAN handle state
|
||||
* @param __HANDLE__: CAN handle.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
|
||||
|
||||
/**
|
||||
* @brief Enable the specified CAN interrupts
|
||||
* @param __HANDLE__: CAN handle.
|
||||
* @param __INTERRUPT__: CAN Interrupt.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
|
||||
* @arg CAN_IT_FMP0: FIFO 0 message pending interrupt
|
||||
* @arg CAN_IT_FF0 : FIFO 0 full interrupt
|
||||
* @arg CAN_IT_FOV0: FIFO 0 overrun interrupt
|
||||
* @arg CAN_IT_FMP1: FIFO 1 message pending interrupt
|
||||
* @arg CAN_IT_FF1 : FIFO 1 full interrupt
|
||||
* @arg CAN_IT_FOV1: FIFO 1 overrun interrupt
|
||||
* @arg CAN_IT_WKU : Wake-up interrupt
|
||||
* @arg CAN_IT_SLK : Sleep acknowledge interrupt
|
||||
* @arg CAN_IT_EWG : Error warning interrupt
|
||||
* @arg CAN_IT_EPV : Error passive interrupt
|
||||
* @arg CAN_IT_BOF : Bus-off interrupt
|
||||
* @arg CAN_IT_LEC : Last error code interrupt
|
||||
* @arg CAN_IT_ERR : Error Interrupt
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Disable the specified CAN interrupts
|
||||
* @param __HANDLE__: CAN handle.
|
||||
* @param __INTERRUPT__: CAN Interrupt.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
|
||||
* @arg CAN_IT_FMP0: FIFO 0 message pending interrupt
|
||||
* @arg CAN_IT_FF0 : FIFO 0 full interrupt
|
||||
* @arg CAN_IT_FOV0: FIFO 0 overrun interrupt
|
||||
* @arg CAN_IT_FMP1: FIFO 1 message pending interrupt
|
||||
* @arg CAN_IT_FF1 : FIFO 1 full interrupt
|
||||
* @arg CAN_IT_FOV1: FIFO 1 overrun interrupt
|
||||
* @arg CAN_IT_WKU : Wake-up interrupt
|
||||
* @arg CAN_IT_SLK : Sleep acknowledge interrupt
|
||||
* @arg CAN_IT_EWG : Error warning interrupt
|
||||
* @arg CAN_IT_EPV : Error passive interrupt
|
||||
* @arg CAN_IT_BOF : Bus-off interrupt
|
||||
* @arg CAN_IT_LEC : Last error code interrupt
|
||||
* @arg CAN_IT_ERR : Error Interrupt
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
|
||||
|
||||
/**
|
||||
* @brief Return the number of pending received messages.
|
||||
* @param __HANDLE__: CAN handle.
|
||||
* @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
|
||||
* @retval The number of pending message.
|
||||
*/
|
||||
#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
|
||||
((uint8_t)((__HANDLE__)->Instance->RF0R & 0x03U)) : ((uint8_t)((__HANDLE__)->Instance->RF1R & 0x03U)))
|
||||
|
||||
/** @brief Check whether the specified CAN flag is set or not.
|
||||
* @param __HANDLE__: specifies the CAN Handle.
|
||||
* @param __FLAG__: specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg CAN_TSR_RQCP0: Request MailBox0 Flag
|
||||
* @arg CAN_TSR_RQCP1: Request MailBox1 Flag
|
||||
* @arg CAN_TSR_RQCP2: Request MailBox2 Flag
|
||||
* @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
|
||||
* @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
|
||||
* @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
|
||||
* @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
|
||||
* @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
|
||||
* @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
|
||||
* @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
|
||||
* @arg CAN_FLAG_FF0: FIFO 0 Full Flag
|
||||
* @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
|
||||
* @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
|
||||
* @arg CAN_FLAG_FF1: FIFO 1 Full Flag
|
||||
* @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
|
||||
* @arg CAN_FLAG_WKU: Wake up Flag
|
||||
* @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
|
||||
* @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
|
||||
* @arg CAN_FLAG_EWG: Error Warning Flag
|
||||
* @arg CAN_FLAG_EPV: Error Passive Flag
|
||||
* @arg CAN_FLAG_BOF: Bus-Off Flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
|
||||
((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))))
|
||||
|
||||
/** @brief Clear the specified CAN pending flag.
|
||||
* @param __HANDLE__: specifies the CAN Handle.
|
||||
* @param __FLAG__: specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg CAN_TSR_RQCP0: Request MailBox0 Flag
|
||||
* @arg CAN_TSR_RQCP1: Request MailBox1 Flag
|
||||
* @arg CAN_TSR_RQCP2: Request MailBox2 Flag
|
||||
* @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
|
||||
* @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
|
||||
* @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
|
||||
* @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
|
||||
* @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
|
||||
* @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
|
||||
* @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
|
||||
* @arg CAN_FLAG_FF0: FIFO 0 Full Flag
|
||||
* @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
|
||||
* @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
|
||||
* @arg CAN_FLAG_FF1: FIFO 1 Full Flag
|
||||
* @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
|
||||
* @arg CAN_FLAG_WKU: Wake up Flag
|
||||
* @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
|
||||
((((__FLAG__) >> 8U) == TSR_REGISTER_INDEX) ? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == RF0R_REGISTER_INDEX)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == RF1R_REGISTER_INDEX)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
|
||||
(((__FLAG__) >> 8U) == MSR_REGISTER_INDEX) ? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
|
||||
|
||||
/** @brief Check if the specified CAN interrupt source is enabled or disabled.
|
||||
* @param __HANDLE__: specifies the CAN Handle.
|
||||
* @param __INTERRUPT__: specifies the CAN interrupt source to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
|
||||
* @arg CAN_IT_FMP0: FIFO 0 message pending interrupt
|
||||
* @arg CAN_IT_FF0 : FIFO 0 full interrupt
|
||||
* @arg CAN_IT_FOV0: FIFO 0 overrun interrupt
|
||||
* @arg CAN_IT_FMP1: FIFO 1 message pending interrupt
|
||||
* @arg CAN_IT_FF1 : FIFO 1 full interrupt
|
||||
* @arg CAN_IT_FOV1: FIFO 1 overrun interrupt
|
||||
* @arg CAN_IT_WKU : Wake-up interrupt
|
||||
* @arg CAN_IT_SLK : Sleep acknowledge interrupt
|
||||
* @arg CAN_IT_EWG : Error warning interrupt
|
||||
* @arg CAN_IT_EPV : Error passive interrupt
|
||||
* @arg CAN_IT_BOF : Bus-off interrupt
|
||||
* @arg CAN_IT_LEC : Last error code interrupt
|
||||
* @arg CAN_IT_ERR : Error Interrupt
|
||||
* @retval The new state of __IT__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
|
||||
|
||||
/**
|
||||
* @brief Check the transmission status of a CAN Frame.
|
||||
* @param __HANDLE__: specifies the CAN Handle.
|
||||
* @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
|
||||
* @retval The new status of transmission (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
|
||||
(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TME0)) :\
|
||||
((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TME1)) :\
|
||||
((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TME2)))
|
||||
|
||||
/**
|
||||
* @brief Release the specified receive FIFO.
|
||||
* @param __HANDLE__: CAN handle.
|
||||
* @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
|
||||
((__HANDLE__)->Instance->RF0R = CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R = CAN_RF1R_RFOM1))
|
||||
|
||||
/**
|
||||
* @brief Cancel a transmit request.
|
||||
* @param __HANDLE__: specifies the CAN Handle.
|
||||
* @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
|
||||
(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ0) :\
|
||||
((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ1) :\
|
||||
((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ2))
|
||||
|
||||
/**
|
||||
* @brief Enable or disables the DBG Freeze for CAN.
|
||||
* @param __HANDLE__: specifies the CAN Handle.
|
||||
* @param __NEWSTATE__: new state of the CAN peripheral.
|
||||
* This parameter can be: ENABLE (CAN reception/transmission is frozen
|
||||
* during debug. Reception FIFOs can still be accessed/controlled normally)
|
||||
* or DISABLE (CAN is working during debug).
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
|
||||
((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include CAN HAL Extension module */
|
||||
#include "stm32f1xx_hal_can_ex_legacy.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup CAN_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN_Exported_Functions_Group1
|
||||
* @brief Initialization and Configuration functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
|
||||
HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
|
||||
HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
|
||||
void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
|
||||
void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN_Exported_Functions_Group2
|
||||
* @brief I/O operation functions
|
||||
* @{
|
||||
*/
|
||||
/* I/O operation functions *****************************************************/
|
||||
HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
|
||||
HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
|
||||
HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
|
||||
HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
|
||||
HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
|
||||
void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
|
||||
void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
|
||||
void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
|
||||
void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup CAN_Exported_Functions_Group3
|
||||
* @brief CAN Peripheral State functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral State and Error functions ***************************************/
|
||||
uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
|
||||
HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros --------------------------------------------------------*/
|
||||
/** @defgroup CAN_Private_Macros CAN Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
|
||||
((MODE) == CAN_MODE_LOOPBACK)|| \
|
||||
((MODE) == CAN_MODE_SILENT) || \
|
||||
((MODE) == CAN_MODE_SILENT_LOOPBACK))
|
||||
#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
|
||||
((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
|
||||
#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
|
||||
#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
|
||||
#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
|
||||
|
||||
#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
|
||||
((MODE) == CAN_FILTERMODE_IDLIST))
|
||||
#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
|
||||
((SCALE) == CAN_FILTERSCALE_32BIT))
|
||||
#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
|
||||
((FIFO) == CAN_FILTER_FIFO1))
|
||||
#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28U)
|
||||
|
||||
#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
|
||||
#define IS_CAN_STDID(STDID) ((STDID) <= 0x00007FFU)
|
||||
#define IS_CAN_EXTID(EXTID) ((EXTID) <= 0x1FFFFFFFU)
|
||||
#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
|
||||
|
||||
#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
|
||||
((IDTYPE) == CAN_ID_EXT))
|
||||
#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
|
||||
#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* STM32F103x6) || STM32F103xB || STM32F103xE || STM32F103xG) || STM32F105xC || STM32F107xC */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F1xx_HAL_CAN_LEGACY_H */
|
||||
@@ -1,56 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32_assert.h
|
||||
* @author MCD Application Team
|
||||
* @brief STM32 assert template file.
|
||||
* This file should be copied to the application folder and renamed
|
||||
* to stm32_assert.h.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32_ASSERT_H
|
||||
#define __STM32_ASSERT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t* file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32_ASSERT_H */
|
||||
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user