199 lines
5.7 KiB
C
199 lines
5.7 KiB
C
/**
|
|
* @file config.h
|
|
* @brief AT command configuration module for TCP2UART
|
|
*
|
|
* Handles UART1 AT commands for network and serial port configuration.
|
|
*
|
|
* Supported AT commands:
|
|
* - AT+IP=192.168.1.100 Set device IP
|
|
* - AT+MASK=255.255.255.0 Set subnet mask
|
|
* - AT+GW=192.168.1.1 Set gateway
|
|
* - AT+PORT=8080 Set TCP Server listen port
|
|
* - AT+RIP=192.168.1.200 Set TCP Client remote IP
|
|
* - AT+RPORT=9000 Set TCP Client remote port
|
|
* - AT+BAUD1=115200 Set UART2 baudrate
|
|
* - AT+BAUD2=115200 Set UART3 baudrate
|
|
* - AT+MAC=00:11:22:33:44:55 Set MAC address
|
|
* - AT+DHCP=0/1 Enable/disable DHCP
|
|
* - AT+SAVE Save parameters to Flash
|
|
* - AT+RESET Reset device
|
|
* - AT+DEFAULT Restore factory defaults
|
|
* - AT+? Query current configuration
|
|
*/
|
|
|
|
#ifndef __CONFIG_H__
|
|
#define __CONFIG_H__
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Configuration magic number "TCPU" */
|
|
#define CONFIG_MAGIC 0x54435055
|
|
|
|
/* Configuration version for compatibility */
|
|
#define CONFIG_VERSION 0x0001
|
|
|
|
/* Device configuration structure */
|
|
typedef struct {
|
|
uint32_t magic; /* Magic number for validation */
|
|
uint16_t version; /* Configuration version */
|
|
uint16_t reserved; /* Reserved for alignment */
|
|
|
|
/* Network settings */
|
|
uint8_t mac[6]; /* MAC address */
|
|
uint8_t dhcp_enable; /* DHCP enable flag */
|
|
uint8_t reserved2; /* Reserved for alignment */
|
|
uint8_t ip[4]; /* Device IP address */
|
|
uint8_t mask[4]; /* Subnet mask */
|
|
uint8_t gw[4]; /* Gateway */
|
|
|
|
/* TCP Server settings */
|
|
uint16_t server_port; /* Server listen port */
|
|
uint16_t reserved3; /* Reserved for alignment */
|
|
|
|
/* TCP Client settings */
|
|
uint8_t remote_ip[4]; /* Remote server IP */
|
|
uint16_t remote_port; /* Remote server port */
|
|
uint16_t reconnect_interval;/* Reconnect interval (ms) */
|
|
|
|
/* UART settings */
|
|
uint32_t uart2_baudrate; /* UART2 (Server) baudrate */
|
|
uint32_t uart3_baudrate; /* UART3 (Client) baudrate */
|
|
uint8_t uart2_databits; /* UART2 data bits */
|
|
uint8_t uart2_stopbits; /* UART2 stop bits */
|
|
uint8_t uart2_parity; /* UART2 parity */
|
|
uint8_t uart3_databits; /* UART3 data bits */
|
|
uint8_t uart3_stopbits; /* UART3 stop bits */
|
|
uint8_t uart3_parity; /* UART3 parity */
|
|
uint16_t reserved4; /* Reserved for alignment */
|
|
|
|
/* CRC32 checksum (must be last) */
|
|
uint32_t crc;
|
|
} device_config_t;
|
|
|
|
/* Default configuration values */
|
|
#define DEFAULT_IP {192, 168, 1, 100}
|
|
#define DEFAULT_MASK {255, 255, 255, 0}
|
|
#define DEFAULT_GW {192, 168, 1, 1}
|
|
#define DEFAULT_MAC {0x02, 0x00, 0x00, 0x00, 0x00, 0x01}
|
|
#define DEFAULT_SERVER_PORT 8080
|
|
#define DEFAULT_REMOTE_IP {192, 168, 1, 200}
|
|
#define DEFAULT_REMOTE_PORT 9000
|
|
#define DEFAULT_UART_BAUDRATE 115200
|
|
#define DEFAULT_UART_DATABITS 8
|
|
#define DEFAULT_UART_STOPBITS 1
|
|
#define DEFAULT_UART_PARITY 0
|
|
#define DEFAULT_DHCP_ENABLE 0
|
|
#define DEFAULT_RECONNECT_MS 3000
|
|
|
|
/* AT command result codes */
|
|
typedef enum {
|
|
AT_OK = 0,
|
|
AT_ERROR,
|
|
AT_INVALID_PARAM,
|
|
AT_UNKNOWN_CMD,
|
|
AT_SAVE_FAILED,
|
|
AT_NEED_REBOOT
|
|
} at_result_t;
|
|
|
|
/**
|
|
* @brief Initialize configuration module
|
|
* @return 0 on success, negative on error
|
|
*/
|
|
int config_init(void);
|
|
|
|
/**
|
|
* @brief Load configuration from Flash
|
|
* @return 0 on success, negative on error (defaults loaded)
|
|
*/
|
|
int config_load(void);
|
|
|
|
/**
|
|
* @brief Save configuration to Flash
|
|
* @return 0 on success, negative on error
|
|
*/
|
|
int config_save(void);
|
|
|
|
/**
|
|
* @brief Reset configuration to factory defaults
|
|
*/
|
|
void config_set_defaults(void);
|
|
|
|
/**
|
|
* @brief Get current configuration
|
|
* @return Pointer to current configuration (read-only)
|
|
*/
|
|
const device_config_t *config_get(void);
|
|
|
|
/**
|
|
* @brief Get mutable configuration for modification
|
|
* @return Pointer to configuration structure
|
|
*/
|
|
device_config_t *config_get_mutable(void);
|
|
|
|
/**
|
|
* @brief Process AT command received from UART1
|
|
* @param cmd Command string (null-terminated)
|
|
* @param response Response buffer
|
|
* @param max_len Maximum response length
|
|
* @return AT command result code
|
|
*/
|
|
at_result_t config_process_at_cmd(const char *cmd, char *response, uint16_t max_len);
|
|
|
|
/**
|
|
* @brief Configuration task (for FreeRTOS)
|
|
* Handles UART1 reception and AT command processing
|
|
* @param argument Task argument (unused)
|
|
*/
|
|
void config_task(void *argument);
|
|
|
|
/**
|
|
* @brief UART1 IDLE interrupt handler for config module
|
|
*/
|
|
void config_uart_idle_handler(void);
|
|
|
|
/**
|
|
* @brief Start UART1 reception for configuration
|
|
*/
|
|
void config_start_reception(void);
|
|
|
|
/**
|
|
* @brief Format IP address to string
|
|
* @param ip IP address bytes
|
|
* @param str Output string buffer (min 16 bytes)
|
|
*/
|
|
void config_ip_to_str(const uint8_t *ip, char *str);
|
|
|
|
/**
|
|
* @brief Parse IP address from string
|
|
* @param str IP address string (e.g. "192.168.1.100")
|
|
* @param ip Output IP address bytes
|
|
* @return 0 on success, negative on error
|
|
*/
|
|
int config_str_to_ip(const char *str, uint8_t *ip);
|
|
|
|
/**
|
|
* @brief Format MAC address to string
|
|
* @param mac MAC address bytes
|
|
* @param str Output string buffer (min 18 bytes)
|
|
*/
|
|
void config_mac_to_str(const uint8_t *mac, char *str);
|
|
|
|
/**
|
|
* @brief Parse MAC address from string
|
|
* @param str MAC address string (e.g. "00:11:22:33:44:55")
|
|
* @param mac Output MAC address bytes
|
|
* @return 0 on success, negative on error
|
|
*/
|
|
int config_str_to_mac(const char *str, uint8_t *mac);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __CONFIG_H__ */
|